Page 1
Mounting instructions ENG – Instructions Keep these instructions for the future maintenance work or dismantling. For Montagehandleiding important information on the energy efficiency of TAURAC luminaires and on maintaining and disposing of luminaires, please contact us. LED lighting NL – Instructie Bewaar deze gebruiksaanwijzing voor onderhoudswerkzaamheden of demontage in de toekomst.
Page 2
Ta = 25 ° C. The equipment must only be used in conjunction with the product supplied driver. Or with a Taurac recommended NL – Voorzorgsmaatregelen bij de installatie driver.
Page 3
ENG – Installation NL – Installatie Spring clips / Veerklemmen ENG - Make sure the quick-connect terminals are fully engaged. ENG - Be certain the body structure has been tightened. ENG - For 4mm ceiling board or of special materials, please use spring clips. NL- Zorg ervoor dat de connectoren volledig met elkaar zijn NL - Wees er zeker van dat de ledmodule goed is verbonden.
Page 4
ENG - Loose wiring NL - Losmaken draad ENG - Push down the “push button and remove the cable from the front. NL – Druk het verend contact in en verwijder de draad ENG – Driver wiring connection: Remark / opmerking : ENG –...
Page 5
ENG - Phase (L), neutral (N), earth (PE), control line (DA/L and DA/N) NL – Fase (L), nul (N), aarde (PE), schakellijn (DA/L en DA/N) Remark / opmerking : ENG – Control by a digital control signal (DSI or DALI) NL –...