Table of Contents
Advertisement
Quick Links
The Mr Volcano® Hero forge reaches temperatures of up to 2600°F and requires best safety and operating precautions.
Propane: Burning of propane produces carbon dioxide which can be fatal when an excess amount is inhaled. To avoid potential carbon dioxide poisoning,
only use the forge in a well-ventilated area or outdoors.
Burn Hazard: When using the forge, the surface temperature of the forge and components will reach up to 600°F. Do not touch any part of the forge while
the forge is heating up or hot. Do not place the forge near a wall or flammable material. Allow for the forge to fully cool down before handling.
Personal Protection Equipment is required when handling Rigidizer, Satanite Refractory, and Insulation Blanket during installation.
Rigidizer: Do not drink. Avoid contact with skin or clothes, it will mildly dry skin and it will harden clothes.
Satanite Refractory: A N95 mask and gloves is required the powder form of Satanite Refractory
Insulation Blanket: This forge comes with Superwool XTRA LBP insulation blanket. See Page 2 for all the benefits of this insulation blanket. However, we
still encourage and recommend our customers to wear gloves and respirator when handling the insulation blanket.
The various uses of this product are outside our control; we can assume no liability for damages incurred through use or misuse of this product.
Failure to follow instructions and generally acceptable practices may result in personal injury or death and damage to property.
Please read this safety and instruction manual in its entirety before using this forge.
This will ensure safe and proper procedures when handling this product.
FLAME HAZARD
EYE PROTECTION
Follow the local laws, regulations, and codes in your place of business or home.
GOOD NEWS!
WARNING
HEALTH HAZARD
HAND PROTECTION
RESPIRATORY
Page 1 v5.5
Advertisement
Table of Contents
Summary of Contents for Mr Volcano Hero 2
- Page 1 This will ensure safe and proper procedures when handling this product. The Mr Volcano® Hero forge reaches temperatures of up to 2600°F and requires best safety and operating precautions. Propane: Burning of propane produces carbon dioxide which can be fatal when an excess amount is inhaled. To avoid potential carbon dioxide poisoning, only use the forge in a well-ventilated area or outdoors.
- Page 2 Page 2 v5.0 This forge comes with Superwool XTRA insulation! A major generational leap in the thermal blanket insulation industry. It emits ZERO crystalline silica, and the fibers are Low Bio-Persistent. Containing high heat safely has been an endeavor put forth before scientists, chemists, and engineers for decades.
- Page 3 Page 3 v5.5 H2 Mr Volcano® Hero 2 Double Burner - PREP/ASSEMBLY INSTRUCTIONS CRITICAL: Using only one burner? THINGS YOU’LL NEED Remove the second burner from the forge. Failure to do so will Mr Volcano Hero Double Burner Forge Kit...
- Page 4 Page 4 v5.5 H2 ❸ Hose and Burner Hose Assembly: Using the hose clamp, tighten the hose onto the Regulator. Next, connect the Y-splitter to the 6’ hose and hose ends, make sure to follow the diagram of the Y-splitter position. Burner Installation: The forge comes with two types of burners;...
- Page 5 Page 5 v5.5 H2 OPERATING INSTRUCTIONS STARTING THE FORGE With soapy water check for leaks: the regulator connections and under the turn knob, hose connection, and flare fitting. Make sure the choke is is not obstructing the burner’s air intake openings. Make sure the regulator is turned off, all the way to the left (counterclockwise).
Need help?
Do you have a question about the Hero 2 and is the answer not in the manual?
Questions and answers