Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for DataCube DC-485V
- Page 1 User Manual Field Logic Corporation [0001]...
-
Page 2: Table Of Contents
Contents Appearance ................................... 1 Starting and Stopping .............................. 2 Start-up ..................................2 2.1. Shut-down ................................... 2 2.2. USB Memory ................................3 Automatic data saving ............................3 3.1. Inserting the USB memory device ......................... 3 3.2. Removing the USB memory device ......................3 3.3. -
Page 3: Appearance
DataCube User Manual 1. Appearance Red LED light Green LED light Tactile switch USB port LAN port... -
Page 4: Starting And Stopping
DataCube User Manual 2. Starting and Stopping 2.1. Start-up The device starts up when the AC adapter power source is plugged in. After startup, the red LED light blinks and the one-minute initialization process begins. When initialization is completed, the red LED turns off and measurement begins automatically. -
Page 5: Usb Memory
When the red LED begins to blink, release the tactile switch. When the red LED turns off, remove the USB memory device. While the red LED is blinking, the DataCube is transferring the data for the day to the USB memory device in preparation for safe device removal. -
Page 6: Web Browser Screens
The default network settings for the DataCube are listed below. IP address: 192.168.1.243 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 You can connect the DataCube to a LAN and access it with a browser via any terminal that can make a TCP/IP connection. http: //<DataCube IP address>/ (default is http://192.168.1.243/) When the DataCube is set up to obtain an IP address by DHCP, run the DataCubeSearchTool. -
Page 7: Top Screen
DataCube User Manual 4.2. Top screen The top screen is displayed when the DataCube Web screen is first accessed or when the “TOP” button is clicked. ② ① Displays the device network settings, etc. Pressing this button allows the USB memory device to be safely removed, unless the... -
Page 8: Monitoring Screen
DataCube User Manual 4.3. Monitoring screen This screen is displayed when the "Monitoring" item in the menu is clicked. ① ② Displays the most recent measurement data. Displays the date of data acquisition. -
Page 9: Graph Screen
② ① The data collected for one day is presented as a multi-line graph. The date of the displayed graph advances by one day. *Only data stored in the DataCube can be displayed (up to 30 days of data, standard). -
Page 10: Report Screen
The data collected for one day is presented. The date of the displayed report advances by one day. Downloads the currently-displayed data to the USB memory device. *Only data stored in the DataCube can be displayed (up to 30 days of data, standard). -
Page 11: Set-Up Screen
This screen is displayed when the "Setup" item in the menu is clicked. The settings that can be changed are displayed as a data entry form. Clicking this button makes the settings effective in the DataCube. Depending on the settings, the DataCube may automatically restart. -
Page 12: Set-Up Screen [Ip Address]
DataCube User Manual 4.6.1 Set-up screen [IP address] The basic network information for the DataCube has been set. (See section 4.1, "Connecting to a network".) This set-up screen allows you to change any of the network settings. Change the IP address, Subnet mask, and Default gateway to match the network to which the device is connected. -
Page 13: Set-Up Screen [Site Name]
DataCube User Manual 4.6.2 Set-up screen [site name] The site name can be displayed at the top of the DataCube Web display screen. Enter the site name after "Site name" on the Set-up screen. Click on the Set button. When you reload the browser, the site name appears at the top of the screen. -
Page 14: Csv File Download
DataCube User Manual 5. CSV File Download You can download the CSV files that are transferred from the DataCube to the USB device every night. Click on "CSV Download" button on the left side of the screen. The CSV files that are in the USB memory device are listed on the screen. Click on the... -
Page 15: Vga Display
DataCube User Manual 6. VGA Display After the DataCube has been initialized, a video signal is output through the VGA port. To access the signal, use an RGB cable that has a D-sub 9-pin connector to connect the port to the VGA port of a display device.