WARNUNG Bedienungs anleitung vor Gefahr durch elektrischen Schlag. Inbetriebnahme aufmerksam lesen, sowie zur weiteren Verfügung aufbewahren. ACHTUNG WARNUNG Hinweis auf wichtige Informationen. Gefahr durch heiße Oberflächen. WARNUNG Brand- und Explosionsgefahr. WARNUNG Gefahr durch Quetschungen. KANTHAL FLOW HEATER USER GUIDE ®...
KONFORMITÄTSERKLÄRUNG Kanthal erklärt hiermit, dass die KANTHAL Flow ® Heater Produktfamilie die anwendbaren Anforderun- gen der EG Richtlinie: Niederspannungsrichtlinie 2014/35/EU vom 26.02.2017 mit der harmonisierten Norm: EN ISO 60335-1:2015 erfüllt. Weiterhin erklären wir, dass die relevante technische Dokumentation der KFH nach der Norm: DIN EN 82079-1: 2018 erstellt wurde.
KFH2-20-400 KFH2-30-400 KFH2-40-400 Max. Auslass temperatur °C 1100 1100 1100 1100 1100 Max. Einlass temperatur °C Max. Umgebungs temperatur °C Volumenstrom Nominal Minimal 13,6 Maximal Druckverlust Nominal mbar Minimal mbar Maximal mbar Max. Betriebsdruck KANTHAL FLOW HEATER USER GUIDE ®...
Page 7
Einlass-Ø 26,7 42,4 48,3 60,3 Klemmverschraubung Auslass-Ø 26,7 33,7 48,3 48,3 60,3 Breite Spannung AC Gewicht 31,5 Die wichtigsten technischen Spezifikationen sind zusätzlich auf dem Typenschild, das sich am Hauptrohr des KFH befindet, angegeben. KANTHAL FLOW HEATER USER GUIDE ®...
Filter verhindern einen Kurzschluss des — Eine Sicherheitsvorrichtung zur Erkennung eines KFH. Entfernen Sie vor der Installation vorsichtig Ausfalls der Gasversorgung ist empfohlen. loses Material in der Rohrleitung. — Die Durchflussrichtung muss immer vom Gaseinlass zum Gasauslass gehen. KANTHAL FLOW HEATER USER GUIDE ®...
Bei 3 Phasen wird ein Phasenasymmetrie- — Das interne Thermoelement misst die Temperatur schutz empfohlen. des Heizelements und muss mit der Regelung des KFH verbunden sein. Die zulässige Temperatur ist am internem Thermoelement markiert. Kanthal Lieferumfang Kanthal Lieferumfang ® ®...
— Prüfung nach einem unerwarteten Ausfall des KFH: – Überprüfung des elektrischen Widerstands (Zwischen Leiter und Leiter). – Überprüfung des elektrischen Isolationswider- stands (1000 V zwischen Schutzleiter und Leiter). – Überprüfung der Eigenschaften der thermischen Isolation. KANTHAL FLOW HEATER USER GUIDE ®...
— Betrieb des KFH für mindestens 12 Stunden. — Vermeiden Sie instabile Ausgänge der Steuerung für beste Ergebnisse. ENTSORGUNG ZUBEHÖR ACHTUNG Nur Kanthal Zubehör sollte verwendet werden. ® Elektrische Geräte, Zubehör und Kanthal bietet folgendes Zubehör an: ®...
Danger of electrical shock. carefully before using the KFH and keep for future reference. ATTENTION WARNING Reference to important Danger of hot surfaces. information. WARNING Danger of fire and explosion. WARNING Danger of crushing. KANTHAL FLOW HEATER USER GUIDE ®...
DECLARATION OF CONFORMITY Kanthal declares the Kanthal Flow Heater (KFH) ® product group fulfills the applicable essential requirements of the EC directive: Low Voltage Directive 2014/35/EU from 26.02.2017 with the harmonized standards: EN ISO 60335-1:2015. In addition, we declare the relevant technical documentation for the KFH is compiled in accordance with: DIN EN 82079-1: 2018.
Internal thermocouple Gas outlet Mounting Bracket TECHNICAL SPECIFICATION Following technical specifications are indicated for the standard KFH series and for the usage with air. By using other non-dangerous gases these specifications may change. HEAT & FLOW DETAILS (AIR) KFH2-03-230 KFH2-11-400...
Page 15
60.3 Ferrule pipe fitting Outlet diameter 26.7 33.7 48.3 48.3 60.3 Width Weight 31,5 The main technical specifications are additionally located on the nameplate which is placed at the main pipe of the KFH. KANTHAL FLOW HEATER USER GUIDE ®...
Filters may be used to avoid a short circuit of the “jet stream” and damage the heating element. KFH. Carefully remove any loose material in the — A safety device detecting a gas supply failure is piping upstream of the KFH before installation. recommended. KANTHAL FLOW HEATER USER GUIDE ®...
– Does not exceed the temperature limitation — SCR power switches are recommended, preferable (180 °C). thyristor switches may be used. In case of 3 phases, phase asymmetry protection is recommended. Kanthal Scope of Supply Kanthal Scope of Supply ®...
— Inspection after an event of failure: – Check the electrical resistance (Between line and line). – Check the electrical insulation resistance (1000 V between protective ground and line). – Check the thermal insulation properties. KANTHAL FLOW HEATER USER GUIDE ®...
— The internal thermocouple must be set to 1000°C. — Operate the KFH for min. 12 h. — Avoid unstable output of the controller for best results. DISPOSAL ACCESSORIES ATTENTION Only Kanthal accessories may be used. ® Electrical equipment, accessories Kanthal offers following accessories: ®...
Page 20
FOR CONTACT INFORMATION PLEASE VISIT: WWW.KANTHAL.COM...