Little Sparrows Technologies bili-hut Quick Reference Card

bili-hut™ Home Quick Reference Card
NOTE: Make sure to read and thoroughly understand the entire contents of the
bili-hut™ Home Use Guide before operating the bili-hut™.
power supply
base mattress
NOTE - Recommended room temperature: select a location
for treatment where the room temperature can be maintained
between 70°F and 76°F (21.1°C and 24.4°C) for your baby's
comfort and safety during treatment.
a. With the base mattress attached to the base
(straps of the base mattress snapped closed), attach
the four (4) magnetic clasps on the shell to the clasps
on the base to form the assembled hut. The clasps
should audibly "click" when in place. Gently tug upward
on the shell to check for secure clasp attachment.
b. Place the bili-hut™ on a smooth, sturdy, even surface
such as a table 2 x 4 feet (0.6 m x 1.2 m) or larger.
4 feet (1.2 m)
Alternatively, use a crib or other surface with barriers.
Little Sparrows
Technolog es
Components
shell
base
Part 1: Assembly and Operation
nest mattress (disposable)
nest (disposable)
c. Place the nest mattress in the nest so that the dark
section is facing up.
d. Slide the nest partially into the assembled hut. After
undressing your baby except for the diaper, place eye
protection over your baby's eyes. Place your baby in the
nest so your baby's head and neck lie entirely within the
dark section of the nest mattress.
NOTE: See Section 6 of the bili-hut™ Home Use Guide
for assistance with disposable nest packages.
e. Gently slide the nest further into the assembled hut
until it touches the bumper on the base mattress.
f. Connect the bili-hut™ power cord to the assembled
power supply. Plug the assembled power supply into a
safe and active electrical outlet. Press the power switch
on the power cord to turn on the bili-hut™ and begin
treating your baby.
g. Fill out the bili-hut™ Home Record Sheet.
h. Complete prescribed phototherapy treatment.
NOTE: Refer to Part 2 of this card for any treatment
interruptions.