1. Manuals
  2. Brands
  3. Uniqscan Manuals
  4. Metal Detector
  5. UB800
  6. Manual

Uniqscan UB800 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

※ Please read carefully the following considerations to avoid the
potential damage during installation.
1. It's available for indoor use, if using outdoors, must be protected by waterproof
canopy.
2. Choose the smooth and stable installation place, don't touch the detector during
security checking to avoid false alarm.
3. Make sure there's no big metal object or strong magnetic field around the detector
within 1~2 meters.
4. Detector probe mustn't install in high temperature or wet circumstance.
5. Please wait 1 minute for its self-diagnosing when machine starts.
6. Do not disassemble the control units except for the professional technician.
7.
Follow the user manual carefully and make sure the right wire connection before
starting.
~ 1 ~

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UB800 and is the answer not in the manual?

Questions and answers

Summary of Contents for Uniqscan UB800

  • Page 1 ※ Please read carefully the following considerations to avoid the potential damage during installation. 1. It's available for indoor use, if using outdoors, must be protected by waterproof canopy. 2. Choose the smooth and stable installation place, don't touch the detector during security checking to avoid false alarm.

  • Page 2: Product Specification

    【 】 PRODUCT SPECIFICATION Walk Through Metal Detector is mainly used for routine security checking. When the passengers carry metal content over preset parameters value, the detector will automatically alarm, meanwhile side LED lights will accurately indicate the alarm location. It greatly helps security guards faster and easier to find out the prohibited metal objects, such as guns, knives, keys…etc.
  • Page 3 【 】 INSTALLATION GUIDE 1. Stationary Metallic objects When installing walk through metal detector, it should stay away from the stationary or fixed bulk metal items at least 30cm; otherwise it will affect the sensitivity, causing false alarm. Metal items include aluminum alloy / stainless steel doors and windows, with reinforced wall, etc.
  • Page 4 4. Electromagnetic Radiation and Electromagnetic Interference The detector use bilateral transceiver technology, therefore, any electromagnetic interference sources and electromagnetic radiation source is not allowed to close the detector. The recommend minimum distance is 0.5m to 4 m, and actual distance will depend on environment and sensitivity.

  • Page 5: Performance And Features

    【 】 PERFORMANCE AND FEATURES  Multizones zones: 33 overlapping network detection zone, bilateral transmit  7 inch LCD screen display ,English Software ,easy to operate.  Sound & LED alarm: Two Sides LED indicator easily show where the metal is. ...
  • Page 6 【PARTS】 1. Main Control Unit 2. Side LED indicator 3. Side door frame panel 4. Infrared Sensor 5. Waterproof Foot Cover 6. Power supply socket ~ 6 ~...

  • Page 7: Installation

    【 】 INSTALLATION Left door panel Right door panel 1. Remove the package of control unit and door panel. 2. Put the control unit case and door panels as above picture shown, then connect the left and right door panel with the control unit case by bolts and nuts. Tighening screws.
  • Page 8 4. Install the screw on the control unit case cover. 5. Lift the walk through metal detector to the vertical position and move to the assigned position. 6. Plug power cable 【 】 CONTROL PANEL There are six buttons on the operation panel. 1.
  • Page 9 3. UP: Turn upward and number increase 4. DOWN: Turn downward and number decrease 5. ENTER: Confirm 6. POWER: Turn on/off 7. Infrared Remote Control 8. 7 inch color LCD screen Remote control: : Turn ON/OFF, Can turn on/off detector quickly : Back to normal working status (PASS CTN, ALARM CTN) : Confirm / Enter / Save : menu back...
  • Page 10 : Turn Right Numbers Key 0-9 : Enter the numbers to change the parameters directly 【 】 NORMAL WORKING STATUS 1. Into the self checking interface After powered on, the walk through metal detector automatically enter into self checking interface. 2.
  • Page 11 The green bars below indicate the interference strength. Press the Enter key to enter into password interface, the up key increase the number, the down key reduce the number, right key let the cursor turn right; Initial password: 000000 3. Press the Enter key to enter the menu interface, the up,down, left and right keys to select the menu item.
  • Page 12 4. Sensitivity: According to the requirements, use the left and right keys to select the sensitivity of Grade and Whole. Press Enter key to enter the submenu. Press power key to return to the previous menu. 5. Grade: Into the Zone setting default selected 1-6 zones self-learning mode, the up and down keys to select the location to enter the single-zone self-learning mode.
  • Page 13 6. Whole: The overall sensitivity setting, left and right keys to select the High or Low sensitivity. Press Enter key to save and return to the previous menu. 7. Frequency: According to the site requirements on the walk through metal detector operating frequency required, use the left and right key to select the operating frequency of automatic adjusting or manually adjust to set the working frequency band.
  • Page 14 8. Automatic: Working frequency left and right keys to select the switch, Press Enter key to save the changes and return to the previous menu. Note: After the Working frequency automatically opened, the walk though metal detector will automatically check the magnetic field around and choose the best frequency to adapt to the current environment every time,so the boot time will be extended.
  • Page 15 9. Manually: The Working frequency manually set 0-99. Total 100 available bands. Left and right keys to increased as 10 digit, the up and down keys increased as 1 digit, the Enter key to save and return to the previous menu. 10.
  • Page 16 11. Ring setting: you can check the alarm tones (1-9 adjustable), alarm volume (0-9 adjustable), alarm time lasts (0-9 adjustable), key volume (0-9 adjustable). Left and right key to select the item, up and down key to adjust parameters. Press Enter key to save the data and return to the previous menu.
  • Page 17 14. Date/ Time: The walk through metal detector date/ time can be set. Up and down key to adjust the date and time parameters, left and right key to increase/reduce the numbers of Date. Press Enter key to save and return to the previous menu. 15.
  • Page 18 16. Password Set: Up and down key to adjust the numbers, left and right key to change the position. Press Enter key to confirm the password into the next item. After changed the password successfully, return to the previous menu, press the Power button directly return to the previous menu.
  • Page 19 button to return to the previous menu. 19. Brightness: Screen brightness setting. Left and right to adjust the brightness. Press Enter key to save and return to the previous menu. 20. Signal out: left and right key to select the item. Press Enter key to save and return to the previous menu.
  • Page 20 21. Situation: 15 different options. Up, Down, Left, Right Select the item. Press Enter key to save and return to the previous menu. 22. Device Info: View the software version and ID, press the Enter key or the power button to return to the previous menu. ~ 20 ~...

  • Page 21: Packing List

    Note: 1. Detecting small metals as coins, factory setting whole sensitivity: High. Each zone’s sensitivity: 975 For factories, prisons and other locations which requires high sensitivity. 2. Excluding the belt buckle, underwear and other small items, can ask the staff directly pass through the walk through metal detector back and forth about 10 times to adjust the right sensitivity under Grade menu.

  • Page 22: Technical Parameters

    【TECHNICAL PARAMETERS】 Input voltage: 100-240V, 50/60Hz Power: <30W Gross weight: 65KG, Package: 2 cartons Working temperature: -30℃ ~ 70℃ Sensitivity: 0-999 adjustable Alarm: Visible and audible alarm Inner Dimensions: 1990mm(H) x 700mm(W) x 500mm(D) External Dimensions: 2230mm(H) x 835mm(W) x 580mm(D) ~ 22 ~...

  • Page 23: Warranty Card

    【WARRANTY CARD】 1. Please keep this card with reasonableness, and show it when maintaining it. 2. This card will be invalid if without the signature or stamp of the designated dealer. Model Number Date Acquisition User Name Address User’s Phone Number User’s Fax Number Date of Maintenance Record of Maintenance...

Table of Contents