Advertisement

Quick Links

FarmTronics
ChickenMaster User Guide
The ChickenMaster™ is a dedicated microprocessor controller specifically designed for use in Mobile
Chicken Trailers/Caravans or Fixed type Egg Laying sheds.
The ChickenMaster™ offers the following functions and features:
Automatic Time Switch control for motorised External Doors
Automatic Time Switch control for motorised Nest Box Gates/Excluders
Automatic Time switch control of the internal LED lighting with two independent modes;
one for Morning times and one for Evening times
Two line, 16 Character per line LCD backlit display
Battery Voltage Display
Wind Speed Display and Wind Speed monitoring to protect the external doors from
high wind gusts
Internal Alarm feature which can be used to monitor water tank levels
(When used with an optional Float Switch)
Manual Control Menu allows the user manual control of the External Doors, Nest Box Gates
and Internal Lights
Easily scroll through multiple STATUS screens showing the status of all programmed outputs
Current TIME
WIND Speed
The
www.farmtronics.com.au
AUSTRALIA
(When used with the optional
FarmTronics FT-WS Wind
MAIN HOME SCREEN DISPLAY
12 :43 :16
W : 0KPH
Den, 100 Fox Drive, Dandenong South. Victoria. 3175.
1
Rev: 05112021-0.2
Anemometer)
m: AUTO
B: 12.8V
Phone: 0411 479 411
MODE Status
Battery Voltage

Advertisement

Table of Contents
loading

Summary of Contents for FarmTronics ChickenMaster

  • Page 1 AUSTRALIA Rev: 05112021-0.2 ChickenMaster User Guide The ChickenMaster™ is a dedicated microprocessor controller specifically designed for use in Mobile Chicken Trailers/Caravans or Fixed type Egg Laying sheds. The ChickenMaster™ offers the following functions and features: Automatic Time Switch control for motorised External Doors •...
  • Page 2 FarmTronics AUSTRALIA Rev: 05112021-0.2 Menu Structure & Functionality PRESS and hold the MENU/OK button for 5 seconds then release the button, the main programming HOME Screen will be displayed which has the five sub menus shown below. • Using the UP or DOWN arrow buttons will scroll through the HOME Screen Sub Menus.
  • Page 3: Manual Control Menu

    Manual Control Menu The Manual Control Menu allows the user Manual Control of the Doors, Nest Box Gates and Lights. Manual Control can still be used even when the ChickenMaster is in the AUTO OFF mode. MANUAL CONTROL * Doors...
  • Page 4: System Configuration Menu

    System Configuration Menu The System Configuration Menu allows the user to program most of the fundamental settings required by the ChickenMaster such as the AUTO TIME parameters, ALARM and WIND sensor settings. Please note that most of these settings are FACTORY set and the only requirement is for the User to enter their Local TIME and any AUTO TIME preferences for the External Doors and Lights.
  • Page 5: Wind Sensor

    The Automated Doors can close unexpectedly when a wind sensor is connected. If you are intending to work inside the caravan behind an automated door you must switch the ChickenMaster to the AUTO OFF Mode. (Remember to switch it back to the AUTO Mode when you have completed your tasks)
  • Page 6 Time period the Automatic External Doors will travel if a Wind event is Triggered during a morning scheduled OPEN Event. The ChickenMaster will do a Wind Speed Measurement 15 minutes prior to an AUTO TIME DOOR OPEN event and if the WIND SPEED Trigger point is reached then it will only open the doors to the appropriate OPEN RUN TIME value which places them in a Wind Safe Position.
  • Page 7 Allows the user to Reboot the ChickenMaster. The Default Setting is NO changing this to YES and pressing the MENU/OK button will power down and restart the ChickenMaster. Please Note: Resetting/Rebooting the ChickenMaster does not erase any of the User Programmed settings. Automatic External Doors Menu The DOORS menu allows the user to program the Auto Times and other parameters for the Automatic External Doors.
  • Page 8 FarmTronics AUSTRALIA Rev: 05112021-0.2 Automatic External Doors Menu (Continued) Open Interval (Default = 60 Seconds) Time Interval that the Automatic External Doors will run when a scheduled AUTO DOOR OPEN event is triggered. Close Interval (Default = 60 Seconds) Time Interval that the Automatic External Doors will run when a scheduled AUTO DOOR CLOSE event is triggered.
  • Page 9: Lights Menu

    FarmTronics Nest Box Gates Menu AUSTRALIA Rev: 05112021-0.2 (Continued) Auto Times The Auto Time function has two Settings. 1. Nest Box Gates OPENING Time 2. Nest Box Gates CLOSING Time. NEST BOX GATES * AUTO TIMES * Nest Boxes Open 04:00...
  • Page 10: Electrical Connections

    FarmTronics AUSTRALIA Rev: 05112021-0.2 Auto Mode (Default = ENABLED) Allows the USER to ENABLE or DISABLE this feature. Auto Times The Auto Time function has Four Settings. 1. Lights ON in the morning. 2. Lights OFF in the morning. 3. Lights ON in the evening.

Table of Contents