Advertisement
Quick Links
Advertisement
Summary of Contents for ankmax H2U30C
- Page 1 REVIEW/LED INDICATOR...
- Page 2 Connect the power adapter to the back of the dock Connect the power adapter to a power outlet...
- Page 3 Connect the USB cable to the back of the dock Connect the other end of the USB cable to your computer USB port...
- Page 4 Insert your hard drive into the source HDD1 When using a second hard drive, insert it into the HDD2 target...
- Page 5 Press the Power Switch to ON You should get White LEDs on HDD 1 and HDD2 when using both drive bays. You should also get a White LED on the Power Indicator.
- Page 6 When not in use, press the Power Switch to OFF. WINDOWS PC HARD DRIVE WITH DATA/FILES Click on the Start icon located on the bottom left of the screen and then click on This PC or Computer.
- Page 7 You should get a new drive letter every time you insert a hard drive with data/files. WINDOWS PC NEW HARD DRIVE SETUP ( HARD DRIVE WITH NO DATA/ FILES ) Click on the Start icon located on the bottom left of the screen and then RIGHT click on This PC or Computer.
- Page 8 Click on Manage Click on Disk Management...
- Page 10 MAC OS HARD DRIVE WITH DATA/FILES A new icon should pop up on your main screen each time you insert a hard drive with DATA/Files Click on the icon to view your hard drive. Note: You can also click on the Finder icon and select your hard drive under Devices. MAC OS NEW HARD DRIVE SETUP (HARD DRIVE WITH NO DATA/FILES)
-
Page 11: Troubleshooting/Support
• New hard drives must be setup, please review new hard drive setup for your OS. • Swap the hard drive out with a spare. Please contact our Technical Support team if issues continue. Please contact our Technical Support team if issues continue：support@ankmax.com... - Page 12 Connect the power adapter to the back of the dock Connect the power adapter to a power outlet...
- Page 13 Insert your Source hard drive into HDD 1 Insert your Target hard drive in HDD 2...
- Page 14 Press the Power Switch to ON You should get White LEDs on HDD 1 and HDD 2 You should also get a White LED on the Power Indicator...
- Page 15 Quickly press the "Clone" button twice and the clone progress LED indicator will light up to show the progress of the clone The cloning progress indicator will display the cloning progress percentage very intuitively...
- Page 16 When cloning is complete, the LED indicator will show 100% Power off the dock and remove your hard drives...
- Page 17 930GB. The actual capacity of a hard drive is usually different from that on its label. • You can check the actual capacity of a hard drive in Windows Disk Management/ Mac Disk Utility. Please contact our Technical Support team if issues continue: support@ankmax.com.
Need help?
Do you have a question about the H2U30C and is the answer not in the manual?
Questions and answers