Setting Up The "Ak Tom Mini" Apparatus - Spinor AK TOM mini Manual

3.1. Direct impact on the area of projection of 3. SETTing UP THE «AK TOM Mini» APPArATUS
the apparatus «AK TOM mini».
1. Press the built-in oscillator to the selected
area without using the connecting cable.
2. Press the «Mode» button 3 times, LED 1 and
2 lights up at the same time (fig. 5).
3. Press the «Start» button. LED 1 will blink
intermittently and you will hear a chirping sound
(fig. 6).
4. The timing of the procedure is 10 min. After
this time the apparatus will stop chirring and LEDs
1 and 2 lights up. The apparatus will automatically
turn off and the LEDs will go out after 10 seconds.
5. To end a session early, simply press «Start»
again.
6. The impact is selected for each zone indi-
vidually. The total time of exposure to the area of
Fig. 5
Fig. 6
33