BesTrix CM 12N Installation Manual

Universal magnetic car mount

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Dear Customer,

We would like to congratulate you on your purchase.

We are doing our best to give our customers top quality

products and service, and we are here to answer any

question you may have on our email:

support@bestrix.com

This manual has been created in order to help you assemble

your new magnetic car mount for the ﬁrst time.

Sincerely,

BesTrix Team

Table of Contents

Need help?

Do you have a question about the CM 12N and is the answer not in the manual?

Questions and answers

Summary of Contents for BesTrix CM 12N

Page 1 This manual has been created in order to help you assemble your new magnetic car mount for the ﬁrst time. Sincerely, BesTrix Team...
Page 2 Installation Guide The new and improved Bestrix CM 12 Magnetic Car Mount provides extra safety and convenience for your smartphone and it is compatible to most types of vehicles and can be easily installed on any smooth surfaced dashboard. The...
Page 3 A. For best practice use the included dashboard mounting pad on curved or textured surfaces. B. Important note! the adhesive tape is not reusable.Please test the position of the mount before removing the protective cover and sticking it to your dash. C.
Page 4 D.Peel protective ﬁlm o the Dashboard pad, and place the sticky side down. press and rub around Dashboard pad to ensure ﬁrm adhesive greep We recommend letting the Dashboard pad sit for 2 hours Before applying...
Page 5 A. Adjust the angles of the mount’s arm and the magnetic head before locking them. Attach the mount to the Dashboard/Windshield B. Remove the protection paper from the gel pad. C. Move the locking lever to “unlocked” position. Unlocked Locked...
Page 6 D. Press down the suction cup's base to remove all air from underneath. Press down E. While pressing the suction cup's base down, move the locking lever to "Lock". lock lever...
Page 7 F. Place one metal plate between your phone and your case, you don't have to glue it on your phone or your case. G. All that's left is to attach your phone onto the magnet head, you may place it in any angle you would like of 360 degrees.
Page 8 In order to renew the suction cup, simply rinse it under warm water and let it dry. Scan the QR Code to Get a *FREE 1 Year Warranty Extension Valid for 30 days from the purchase date* If you have any question you can contact us at: support@bestrix.com www.bestrix.com...