Related Manuals for Implicit Audio 2x12 Cabinet
Summary of Contents for Implicit Audio 2x12 Cabinet
- Page 1 Implicit Audio 2x12 Cabinet Assembly Built for the craft 2x12 Cabinet Assembly Instructions @implicit.audio www.implicitaudio.ca...
- Page 2 Built for the craft Thank You. Thank you for purchasing an Implicit Audio guitar cabinet kit. Whether you’re new to woodworking or you' r e a seasoned veteran, this kit serves as a foundation to build a piece of gear that is truly unique.
-
Page 3: Required Tools
Implicit Audio 2x12 Cabinet Assembly Built for the craft Fabrication Tips Dry fit everything before glueing to ensure that all pieces fit together. Try to complete the entire assembly within the working time of the glue. Make sure that all connections are properly seated. -
Page 4: Cabinet Parts
Implicit Audio 2x12 Cabinet Assembly Built for the craft Cabinet Parts Bottom Side x2 Horizontal Blocking x2 Vertical Blocking x2 Screen Baffle Bottom Back Top Back Fasteners 1. Back Screw x8 2. Speaker Screws x8 3. Feet Screws x4 4. Handle Screws x4 5. - Page 5 Implicit Audio 2x12 Cabinet Assembly Built for the craft Step 1 Lay the Baffle flat and hammer the Tee Nuts into the 8 holes provided. It’s important to do this first on a solid surface. Step 2 Lay the Top piece flat and hammer the Tee Nuts into the 4 holes provided on the INSIDE of the part.
- Page 6 Implicit Audio 2x12 Cabinet Assembly Built for the craft Step 3 Lay the Bottom piece flat with the grooves facing up. Step 4 Join one of the Side pieces with the Bottom. Note: Both side pieces are exactly the same.
- Page 7 Implicit Audio 2x12 Cabinet Assembly Built for the craft Step 5 Slot the Baffle into the Bottom and Side. Ensure that the Baffle is properly seated. Note: The Tee Nuts from Step 1 should be on the OUTSIDE of the cabinet.
- Page 8 Implicit Audio 2x12 Cabinet Assembly Built for the craft Step 7 Before putting on the Top piece, slot in the Right, Left, and Bottom Blocking pieces. Step 8 Join the Top piece to the Cabinet. When finished, insert the remaining Blocking piece.
-
Page 9: Hardware Installation
Implicit Audio 2x12 Cabinet Assembly Built for the craft Step 9 Attach the two Back pieces with the screws provided. Note: Space has been left between the Back and Sides to allow for Tolex. Hardware Installation 1. Install your speaker from the INSIDE of the cabinet using the screws provided.