IMPRESSIONS Clarity Instructions

WARNING
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USING
• Do not disassemble or refit the products.
• Do not place or store mirror where it can fall or be pulled into a tub
or sink. If the appliance falls into water, DO NOT REACH INTO THE
WATER!
• Do not place the product in wet environments in case of
damage to the battery.
• Keep the mirror dry during daily use.
• Turn off the power before cleaning. Use the mirror after it is
completely dry.
• Turn off the power if not used or stored for a long period of
time. Keep it away from children's reach.
• Avoid prolonged direct sunlight.
• Make sure that the voltage rating of your power source is compatible
with the mirror.
• Do not place the product near or into heat sources to avoid
explosion or fire.
• Stop using immediately if abnormal conditions occur
INSTRUCTIONS FOR USING CLARITY LED MAKEUP MIRROR
WITH TOUCH SENSOR:
1) Do not mix batteries of different types, chemistry, brands or age.
2) Clean battery compartment and remove debris before battery
installation.
3) Insert batteries accordingly as indicated or use the provided USB cable to
connect to a power source
4) Remove batteries if mirror will not be used for an extended
period of time to prevent possible battery leakage.
5) Remove all old batteries and replace with all new batteries.
6) Dispose of batteries properly.
MADE IN CHINA
Clarity Clarity
L E D M A K E U P M I R R O R
ALWAYS READ THE INSTRUCTIONS CAREFULLY BEFORE USING.