Page 1
How to use the ZBE Colorpro II The ZBE ColorPro II is designed to color correct large quantities of images. It may be replaced with your other color input devices. Below are instructions for installing and using the device with DP2.
Page 2
Installing the ZBE Colorpro II Page 2 of 5 1. Click Browse. Browse to the directory where DP2 is installed and locate the ColorPro folder. 2. Click Next >. 3. The install window may come back with messages about Windows Logos, click Continue Anyway.
Page 3
Installing the ZBE Colorpro II Page 3 of 5 4. Click Finish. You are finished installing the ColorPro II. Selecting the ZBE Colorpro II option in DP2 1. Start DP2 and click Adjust on the Task Menu. Once the Adjust Images window opens click the Misc tab.
Page 4
Page 4 of 5 The ColorPro II can be effective in two modes: Color Mode and Crop mode. When DP2 starts the device is set to Color Mode. To switch to Crop Mode, press the button (located in front of the Blue Wheel).
Page 5
Installing the ZBE Colorpro II Page 5 of 5 To switch to Crop Mode press the correct button (located in front of the blue wheel). Look at the status bar in the Adjust Image window to make sure it is set to Crop.