JMR TN1000 Manual

Table of Contents

Download this manual

1. Always pay close attention to what you are doing. Turn off cell phone, pager, etc when

using this machine.

2. This machine is meant to be operated by competent individuals who have a thorough

understanding of tube notchers and machines in general.

3. Always wear eye protection while operating tube notcher.

4. Never put your hands or other body parts into tube notcher apparatus.

5. Never wear loose clothing while operating tube notcher.

6. Always work in a clean, safe, well lit, level work area.

7. Never use the wrong hole saw for the material being worked.

8. Never operate the tube notcher with broken, worn or damaged parts.

9. DO NOT attempt to repair and reuse any damaged tube notcher parts.

10. User assumes all risks when using this product.

11. Properly clamp the material to be notched in the tube vise. DO NOT use shims/spacers on

the material. Accuracy of the notch and stability of the material in the vise could be

affected.

01/31/2006 Rev 1

TUBE NOTCHER

P/N TN1000

WARNING

Table of Contents

Do you have a question about the TN1000 and is the answer not in the manual?

Page 1 TUBE NOTCHER P/N TN1000 WARNING 1. Always pay close attention to what you are doing. Turn off cell phone, pager, etc when using this machine. 2. This machine is meant to be operated by competent individuals who have a thorough understanding of tube notchers and machines in general.
Page 2 Distributed by: Trick-Tools 80 Truman Road Pella, IA 50219 Phone:1-877-VAN-SANT E-mail: sales@trick-tools.com Here at Trick Tools we believe that our customers deserve the best value in their tool and equipment purchases. We are constantly at work searching out a variety of high quality, high performance tools to offer at the best prices possible.
Page 3 6. The tube notcher may also be mounted using the optional mounting block which can be welded to a stand (or similar) and mounted using three 5/16-18 bolts as shown in Figure 3. 7. A mounting kit (NMT100) or a complete stand (NS100) is available separately thru JMR Manufacturing to mount the notcher.
Page 4 WARRANTY 1. One year limited warranty on tube notcher. 2. Warranty item must be sent to JMR Manufacturing postage pre-paid for inspection. JMR Manufacturing will replace or repair item at their discretion. 3. JMR Manufacturing makes every attempt to satisfy customers as quickly as possible.
Page 5 Figure 1. Tube Notcher overall view. 01/31/2006 Rev 1...
Page 6 Figure 2. Tube Notcher shipping and working configuration. 01/31/2006 Rev 1...
Page 7 Figure 3. Tube Notcher mounting. Figure 4. Hole saw mounting. 01/31/2006 Rev 1...