Advertisement
Installation and use
1.First,adujust the angle you need,finally fasten the floodlights with screws
3.Connect the power wire from the Main lineto the power wire of the lamp,and then
make treatment for water reistance. Pls note that the Brown color wire is Live wire,Blue
wire is Null line,the yellow and green wire is Earth line.
Attention
1.Please turn off the power supply befor installation or changing assembly parts.
2.The input voltage and the lamp should be adapted. After connecting the power line, please make sure the wiring section
3.Non-professionals, must not install or dismantle the lamps.
4.All the floodlights during installation and in use should not be put with glass cover vertically upside.
Packing Spec
Item
Measurement（mm）
L165*W135*H70
BR-FL10W-07(ID:TC)
L205*W170*H75
BR-FL20W-07(ID:TC)
L253*W220*H85
BR-FL30W-07(ID:TC)
L305*W260*H95
BR-FL50W-07(ID:TC)
Remarks：
1.White light series: WW (3000-3500K) NW (4000-4500K) CW (5000-6500K)
2.Luminous flux tolerance for ±10%
3.Products shall be subject to any changes without prior notices.
1
0.98
0.96
0.94
0.92
0.9
0.88
0.86
0
90
Through the 720H accelerated aging test,high and low temperature prediction in the rated under the working conditions after 35000H,will provide an
average 70% optic maintenance ratio(L70).
2.Install the LED Floodlight onto the wall or ground,punch hole on the wall orground,prepare
the expansion screw,and then fasten the floodlight
340°
4.Turn on the power supply to ensuer the light is working,Installed.
Box
Gross weight
Pcs/box
0.57 kg
1 kg
1.8 kg
2.54 kg
Light attenuation map
180
270
360
360°
is insulated.
Measurement(mm)
1
L 430*W350*H315
1
L430*W360*H335
1
L460*W275*H375
1
L540*W325*H315
450
540
Carton
Gross weight
Pcs/carton
15.2 kg
24
17.4 kg
16
15.8 kg
8
16.6 kg
6
(Hours)
630
720
Advertisement
