Summary of Contents for OPUS NOVO ELLY
- Page 1 Your Digital Care Assistant OPERATING INSTRUCTIONS / MANUAL version v.1.3 06-21 EN...
- Page 2 INFORMATION ABOUT DISPOSAL When using ELLY in European countries (EU incl. EFTA), the following disposal guidelines must be followed: Do not dispose of this product with regular household trash since it must be collected and processed separately. Disposal of this equipment in regular household trash is...
-
Page 3: Table Of Contents
CONTENTS GENERAL INFORMATION Safety instructions Product information List of components and parts INSTALLATION Wall mounting Pedestal (alternative) OPERATION App installation, set-up and configuration General app usage Configuration: module and motion sensor Adjustment of the light points Troubleshooting MISCELLANEOUS General operation and cleaning Maintenance and returns... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS This section addresses general applicable safety guidelines and war- nings for proper installation, deinstallation, start-up, operation, cleaning, maintenance and servicing of ELLY, a product manufactured by Opus Novo GmbH. GENERAL HAZARD WARNINGS AND SAFETY GUIDELINES These operating instructions including safety instructions are an integral component of the product and should therefore be retained until the product is disposed of. - Page 5 Opus Novo GmbH has not operation of the product and possess conducted or delegated the afore- the necessary qualifications, and who mentioned itself.
- Page 6 The light points of the lumi- Opus Novo GmbH! Otherwise, this naire ELLY mark the way for people will automatically void any and all walking around their home at night. warrantee and liability claims.
- Page 7 Only use a power supply unit maged or missing parts), please get as prescribed by the manufacturer of in contact with Opus Novo GmbH. ELLY! NOTICE ABOUT THE PEDESTAL MOUNT For safety and functional reasons, a wall mounting of this product is highly recommended! Use the enclosed pedestal to install the product temporarily only if wall mounting is not immediately available.
- Page 8 Opus Novo GmbH accepts contact. Lay cables out of the reach no liability for damages which are of children.
- Page 9 ...). Modified and/or untested parts may not be used. In particular, This product may only be no power supply unit not provided repaired and/or maintained by by Opus Novo GmbH may be used! specialists authorized by Opus Novo GmbH.
- Page 10 SAFETY INSTRUCTIONS In the event of fumes or Avoid improper or uninten- smoke, stop using the product tional product activation or product immediately! Likewise, if it unex- use. Disconnect the product from the pectedly overheats or malfunctions, power supply and unplug the power stop operating the product at once! supply unit whenever the product is Continued use or operation of the...
-
Page 11: Product Information
In addition, a “motion detector” recognizes the movements of people and, if desired, sends a message to a smartphone app. IMPORTANT: Elly is not a medical device and is not able to re- cognize falls or injuries, nor can it prevent or stop them. - Page 12 If any component is missing, contact the deliverer or manufacturer immediately. Wall anchors and screws may have to be used based on the nature of the wall (sub)surface. ELLY module power supply packaging manual...
- Page 13 MOUNTING WALL MOUNT 1.0 - 6.0 m 1.4 - 1.6 m mounting height: 1.4 - 1.6 m Ensure no one will inad- sensor coverage area (dis- vertently walk through the tance): 1.0 - 6.0 m light beam. First mark the hole for the Then drill the hole for the mount with a pencil.
- Page 14 MOUNTING WALL MOUNT Now slide the black sleeve Slide the module onto the over the mounting pivot. mounting element. Rotate the sensor in the Gently screw on the acorn direction you wish to detect nut. motion (e.g. bed exit point). In doing so, rotate the entire module.
-
Page 15: Pedestal (Alternative)
MOUNTING PEDESTAL (ALTERNATIVE) First slide the black sleeve If necessary, remove the non- over the mounting pivot. slip mat from the pedestal. Now tighten the nut, using assembly sequence: 1) black washer suitable pliers. 2) pedestal 3) washer 4) nut Now mount the non-slip mat If dismantling the pedestal, back on the pedestal. -
Page 16: Operation
Connect the module to the Open WiFi settings on your power supply unit. A blue smartphone. Select the light will begin to blink in the WiFi provided by your ELLY lower segment of the module. device. Install Install Now select the option “Log... - Page 17 OPERATION SET-UP Now, ELLY blinks and att- When ELLY stops blinking, empts to connect with the the process was successful. WiFi you have entered. From now you can already use the light-points and the night-light. Please fol- low the following instructions, if you also wish to use the smartphone app.
- Page 18 OPERATION CONFIGURATION accessible modules Install Install When you first use the app, Click on an accessible modu- the module page will open. le, give it a name and save Press “scan” to search for the module. accessible modules. Install Install The module is now saved. Here, you can test the light You can configure it in the points, adjust the brightness...
-
Page 19: General App Usage
OPERATION GENERAL APP USAGE Install Install Choose Settings from the Here, you can activate or menu. deactivate the alarm tone or vibration. Install Install In addition, you can define Here, you can set how long the “idle period” between after an alarm there will be alarms. - Page 20 (e.g. at night). Install Install Important: If possible, leave If you have clicked the alarm your smartphone continuous- symbol before, you will now ly plugged in! (to minimize see the ELLY application in errors) the status bar.
- Page 21 Install Install Make sure that your “media You can manage up to three volume” is activated so that ELLY modules in one app. you can hear the alarm! Install Install In this view, you can switch All registered modules can...
- Page 22 MODULE CONFIGURATION Adjust nightlight brightness in the module settings (it is The duration and brightness automatically activated in low of the light points (after a room lighting). Set 0 % for movement was detected) can disable this function. also be varied. sensor Only deactivate this button Now, orient the...
- Page 23 LIGHT POINTS ADJUSTMENTS The direction of a light point tilt a light point, use can be changed by carefully the lever provided for that turning and/or tilting purpose. Tilt the light tube slowly and cautiously! specific light point. the entire segment cau- Turn In the „Module Settings“...
-
Page 24: Troubleshooting
Install Install You can ignore this warning or deactivate it in your set- tings (battery optimisation). To do so, click on “ignore optimisations” Install Install Search for the ELLY app, In the overview, select “All select “Allow” and confirm Apps”. by pressing “OK”. - Page 25 16). Reset If, despite correct network 1) Reset your ELLY module settings, the module is not and reconfigure it. accessible, you have the 2) Switch your WiFi router following options. off, then on again.
- Page 26 USAGE GENERAL damage Avoid multiple mobile pho- Swivel the LEDs only when nes accessing one ELLY at necessary and very carefully! the same time. (damage) alarm: max. 30 sec. delay Important: An alarm may go In the app, the alarm button...
- Page 27 USAGE GENERAL When using a wall mount, Ensure the module does not do not put too much load tilt, fall over, or the position on the module. is changed inadvertently. Important: Do not use any Important: Only use a damp or dry cloth for cleaning.
- Page 28 WE HOPE YOU GET GREAT ENJOYMENT FROM ELLY! BIf you have questions about mounting, use or returns, please contact OPUS NOVO GmbH: www.opus-novo.com...
- Page 29 OPUS NOVO Evolving good life OPUS NOVO GmbH Neubaugasse 24/1 8020 Graz | Austria www.opus-novo.com...
Need help?
Do you have a question about the ELLY and is the answer not in the manual?
Questions and answers