Do you have a question about the SpotyPal and is the answer not in the manual?
Questions and answers
Summary of Contents for MyLoneWorkers SpotyPal
Page 1
MyLoneWorkers Smart Lone Worker Management USER GUIDE External BLE SOS Button www.myloneworkers.com info@myloneworkers.com...
Page 2
Our External BLE SOS buttons are waterproof, thin & light (weight less than 10gr!) devices with a CR2032 battery that can be easily replaced when needed (Worker having the SOS button connected with the MyLoneWorkers app on his phone gets informed with a simple message within the app)! They can be easily attached for example to keys or clothes, or can be worn as IDs around the Worker neck.
Page 3
SOS Button Assignment Enter MyLoneWorkers mobile applica - tion and press on Settings. Press “Settings” button under “SOS Button” section. Press “Assign Device” button under “Advanced Settings” section. Press the SOS button device for 3 seconds until you hear the buzzer –...
Page 4
The next step is to connect it to your Worker device, by following the procedure below: Navigate to Settings page on MyLoneWorkers mobile application. Press “Settings” button under “SOS Button” section. Press “Search Devices” button under “Connect Manually” section; the system displays a list with all assigned SOS button devices around you, sorted from the nearest one to the farthest one.
Page 5
SOS event sending within the 10 seconds timeframe (in case of false alarm). This can be used as a trick by the Worker if the SOS button device is forgotten / dropped-down by accident, in order to find it. EXTRA TIP www.myloneworkers.com info@myloneworkers.com...
Page 6
The assignment process is most probably taking a bit longer to be sent (the system attempts to send respective details every 1 minute). In some cases the smartphone’s Bluetooth conflicts with Wifi 2.4 GHz. Please restart your Bluetooth and then your Wifi. www.myloneworkers.com info@myloneworkers.com...
Page 7
Open the device from the notch on the side with the opener triangle plastic piece. Replace the old battery with the new one. The battery type is CR2032. After putting the cover back, press the button to connect to your smart phone again. www.myloneworkers.com info@myloneworkers.com...
Need help?
Do you have a question about the SpotyPal and is the answer not in the manual?
Questions and answers