Table of Contents
Advertisement
Quick Links
Molenvliet 28
3961 MV Wijk bij Duurstede
+31 343 595 400
www.sitetec.nl | info@sitetec.nl
Unit manual
M405D mixing unit
First of all we like to thank you for purchasing this mixing unit and hope it will be of complete
satisfaction to you. This product is built to perform, easy to maintain and is user friendly. To insure a
long lifetime of this quality product we would like your attention for this maintenance- and operating
manual. Please keep it near the mixing unit at all times so it can be of help.
In all cases in which we act as offerer or supplier, our offers, assignments given to us and agreements concluded with us are subject to the METAALUNIE
TERMS AND CONDITIONS. These terms and conditions have been filed at the Registry of the Rotterdam District Court. The Dutch law is applicable on all
our agreements. KVK nr. 34043947 | VAT/BTW nr. NL.0034.76.443.B01 | IBAN NL94ABNA 0565320300
Advertisement
Table of Contents
Summary of Contents for SITETEC M405D
- Page 1 | info@sitetec.nl Unit manual M405D mixing unit First of all we like to thank you for purchasing this mixing unit and hope it will be of complete satisfaction to you. This product is built to perform, easy to maintain and is user friendly. To insure a long lifetime of this quality product we would like your attention for this maintenance- and operating manual.
- Page 2 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl OPERATING MANUAL MOBILISATION PLACING THE MIXING UNIT ON SITE OVERALL CHECK OF THE MIXING UNIT CAPACITY PARAMETERS VALVE SCHEDULE CHECK BEFORE STARTING THE MIXING UNIT STARTING THE MIXING UNIT...
- Page 3 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl MOBILISATION The unit is equipped with fork lift pockets to mobilize this mixing unit. The weight of the unit is 1540 kg. Prior to lifting the mixing unit a few checks must be made:...
- Page 4 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl OVERALL CHECK OF THE MIXING UNIT Before you start mixing there are several checks to be made: Check for debris in the mixing tank. Tank must be clean...
- Page 5 As mud is being used the fluid level inside the mixing tank must be maintained. Add water and bentonite on time and, if a mud recycling unit is used, check the mud level of the mud pit. With a SiteTec recycling unit, mud will be transferred from the recycling unit to the mixing unit.
- Page 6 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl Before working on the unit, stop all functions and switch off the main switch Disconnect main power cable Before working on the pump close all valves and drain the pump...
- Page 7 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl DEMOBILISATION The unit is equipped with fork lift pockets to demobilize this mixing unit. Prior to lifting the mixing unit a few handlings must be made:...
- Page 8 | info@sitetec.nl PARTS SUPPLY AND RECOMMENDED PARTS STOCKLIST For optimal use, we recommend to use genuine SiteTec parts only. We recommend to have the following wear parts on stock. When ordering parts always mention unit type and serial number.
Need help?
Do you have a question about the M405D and is the answer not in the manual?
Questions and answers