For any further information please visit: www.noids.green CONTENTS 1. Instructions Introduction This user manual Intended use General safety instructions For Pot by NOIDS I Manufacturer liability Identification plate Disposal 2. Description Product overview Glass Set Filter Set...
• Children must never play with the appliance. Keep the appliance out of children’s reach. All NOIDS products follow strict quality control procedures, including testing Based on random sampling. Such testing may leave some traces of use on a test- ed product.
• Keep the cooker and the power cord away from heat, moisture, slippery surfaces and sharp edges. • Do NOT replace the Glass with any unauthorized container. The matching NOIDS Glass has a highly sensitive built-in thermal sensor. Unauthorized container will not be recognized by the cooker.
• Dispose of the packing materials at an appropriate disposal facility. • NOIDS products have achieved zero plastic in packaging by careful and responsible design. Nevertheless, third party logistic might use plastic for delivery. Dispose third party plastic responsibly according to local regulations.
2.4 Main Body 1. Protection Ring insulates heat 2. Rotary Control for function selection 3. Function Mark specific function 4. Base Mark to align functions 5. LED Light indicates a function is activated 2.5 Functions The Rotary Control is used to select one of the 5 working functions or the OFF function. Once connected to power, the Point LED Lights up above the Base Mark to show the cooker is con- nected to power and in standby mode.
Part Material Standard compliance Glass Borosilicate glass XXXX Pipette Dish Lid Sleeve SUS304 stainless steel XXXX Sensor Pad Silicone Lock Ball Filter Funnel SUS304 stainless steel XXXX Silicone Brush SUS304 stainless steel XXXX Wool 3. Use ELECTRICAL SHOCK HAZARD - Do not use an extension cord. - Failure to follow these instructions can result in electrical shock, fire, or death.
7. The cooker goes back to the initial standby mode and beeps once the heating-cooling cycle is complete. Pot by NOIDS has carefully designed temperature control with high precision, which ensures that prolonged decarboxylation does no harm to the bioactive com- pounds in the plant material.
3. Put the Filter Set back in. 4. Attach the Pipette to the Spout with the Lock Ball. 5. Press down the Filter Disc slowly and carefully till the oil enters the Glass Pipette. 6. Close the upper opening of the Pipette with your thumb while removing the Pipette. 7.
Heating time for evaporation Restart the function to continue evap- function is too long oration Thermal sensor malfunction Restart the function by turning the Rotary Control 30 sec Blinks Component defect Contact NOIDS for repair. (Visit www. noids.green)