Summary of Contents for HOLUND FST-C50HD30-2
- Page 1 Holund vnr 152-971 User Manual FST -C50HD30-2 Digital Underwater Camera (including brush)
-
Page 2: Table Of Contents
Catalogue 1. Pre-use instructions ........................... 2 2. Equipment introduction ........................3 3. System assembly ..........................4 3.1 How to plug in the equipment ....................4 3.2 How to unplug the equipment ....................4 3.3 How to connect the equipment to the test transfer cable ............5 3.4 How to connect the equipment to the control box .............. -
Page 3: Pre-Use Instructions
1. Pre-use instruction 1. This manual is designed for operators who are responsible for installing and using the equipment. This equipment must be connected and operated in full accordance with the rules. Wrong connection or incorrect use of the equipment may cause irreversible damage. If a part of the component does not function properly, the operator must check and verify that the equipment does not pose any threat to the surrounding environment . -
Page 4: Equipment Introduction
2. Equipment introduction The underwater camera assembly is composed of a underwater camera, a underwater lamp, a cleaning brush and a connecting plate. 2.1 Underwater camera Underwater camera is a underwater video shooting equipment. It mainly consists of cylinder and cables. Largely applied for underwater fixed point video monitoring, it can transmit high-definition videos from the fixed point to the connected computer to realize real-time monitoring and video recording. -
Page 5: System Assembly
2.2 Underwater Lamp Underwater lamp is a lighting device, mainly consisting of cylinder and cables. It is designed to offer lighting support for camera shooting in low-light underwater environments. Depth of work Size ≤ Ö65×110mm(cables excluded) Weight ≤ 1Kg( in open air, cables excluded) Light color 940nm infrared light LED power... -
Page 6: How To Unplug The Equipment
3.2 How to unplug the equipment Hold the knurl area and pull backwards to release the locking and then pull the plug. 3.3 How to connect the equipment to the test transfer cable Connect the equipment plug to the test transfer socket. Please refer to "3.1 How to plug in the equipment" for connection method above. -
Page 7: How To Connect The Equipment To The Control Box
3.4 How to connect the equipment to the control box Ignore this step if you have not bought the control box. Step 1: Connect the underwater camera equipment components to the control box. Step 2: Connect the network cable to the control box ports. Step 3: Connect the power cord to the DC power ports of the control box. -
Page 8: System Operation
4. System operation 4.1 Operation of Camera The computer IP needs to be in the same network segment as the camera, and factory IP setting is defaulted to: 192.168.0.123. You can modify the computer IP to the same network segment as the camera. Please refer to Appendix I. -
Page 9: The Display Of Video
4.3 The display of video Click the "Main View" tab on the tab bar to display the image as shown below, which means the camera has been successfully added to the equipment list. Double-click on the IP to display the image. 8 / 16... -
Page 10: The Recording Of Video
The following is the interface of successfully connecting the camera and displaying the video. 4.4 The recording of video Rightclickon the videowindowand the followinglist will appear, select"ManualRecording"and left click. A green VCR appears in the upper right corner of the video, as shown, indicating that recording begins. 9 / 16... -
Page 11: The Usage Of Lamp
When you need to stop recording,right click and then left click"ManualRecordingOff". When the followingwindow appears, the recordingis saved successfully,and the save path displayedin the window is the save path of the video, reading the video accordingto the path. 4.5 The usage of lamp Turn the lights on and off by powering on and off the lighting adapter. -
Page 12: System Use And Maintenance
5. System use and maintenance 5.1 Precautions For safety, do not use a water-carryinghand to plug and pull the plug. Keep the equipment cable, control box and plugs dry as they are non-water-resistantcomponents. Do not squeeze, tread and bend the cable. Do not collision the equipment to avoid damaging the glass. 5.2 Rinse after use After each use of the underwater camera in seawater, rinse with fresh water to prevent possible erosion damage to the system caused by seawater. - Page 13 Step 2: Click “Network & Internet”, and click “change adapter options”. Step 3: Rightclickon the “Ethernet”, then click“Properties ”. 12 / 16...
- Page 14 Step 4: Double click “Internet Protocol Version 4 (TCP/IPv4)" Step 5: Configure the IP address to 192.168.0.221 and the default gateway to 192.168.0.1. Thenclick “OK. ” 13 / 16...
-
Page 15: Appendix Ii How To Install The Seetong Video Surveillance Software
Appendix II How to install the SEETONG video surveillance software Doubleclickto run "Seetong_1.0.0.8-20180927190857" and the systemwilldisplaythe corresponding selectioninterfaceaccording to the operatingsystemlanguageused by the currentcomputer . The followingfigureshowsthe languageselectioninterfacethat appearsintheChineseversionof theoperatingsystem.Thespecificoperationisas follows . Step 1: Select the installation language "English" . Then the welcome wizard interface appears. As shown in the following image: 14 / 16... - Page 16 Step 2: Click“Next” to selectthe installationdirectory. As shownin the figurebelow: 15 / 16...
- Page 17 Step 3: Click"Install"and the installationis completeas shownin the figure: 16 / 16...
Need help?
Do you have a question about the FST-C50HD30-2 and is the answer not in the manual?
Questions and answers