MONTGOMERY GOS156 Instructions

Single Door
Metal Cabinet
H 1600mm W 600mm D 410mm

Box Contents

J
A1
C1
B1
D1
F1
J

Step 1

Insert and slide the front base bracket
(E1) and back brace bracket (F1) into the
bottom of the left side panel (B1) and right
side panel (B2). Attach brackets using the
provided self tapping screws (J) in each
of the four corners.
TIP: Use a trestle table or saw horse to
make assembling easier.
Very Important: Unpack the unit and confirm that you have all the parts listed. Assemble the unit on
a solid, level surface. Avoid carpet. You may need the assistance of a second person during assembly.
Safety Tip: For added safety and support, we recommend you fix the unit to a wall.
You will need the following: Phillips-head screwdriver, rubber mallet.
For your safety the following must be adhered to: • This cabinet will hold 30kg per shelf.
• Heavier items should be stored on the lower shelves. • Always distribute items evenly on all shelves.
N
D1
B2
G1
D1
I
M
E1
J
NO PART NAME
A1
Top panel
B1
Left side panel
B2
Right side panel
C1
Back panel
D1
Shelf
E1
Front base bracket
F1
Back brace bracket
G1
Door
I
Shelf support
J
M4x10mm Self tapping screws
M
Washer
N
Wiring grommet
WARNING: This unit may have sharp edges,
please use gloves when assembling.
PLEASE NOTE: Tip-over prevention kit
included (refer to last page for installation).
B1
E1
F1
PCS
1PC
1PC
1PC
1PC
3PCS
1PC
1PC
1PC
12PCS
18PCS
1PC
2PCS
B2