Advertisement
Toddler Guard Rail
Garde de sécurité
A. Undo the six bolts attaching the crib side to the ends and remove the side.
B. Adjust the mattress support to its lowest position.
C. Align the threaded holes on the guard rail with the bolts on the crib ends, then thread and tighten
all six bolts.
A. Desserrer les six vis de fixation du côté de lit aux fins de lit et retirez le côté.
B. Régler le support du matelas dans sa position la plus basse.
C. Alignez les trous filetés sur le garde de sécurité avec les boulons sur les fins de lit, puis visser et
serrer les six vis.
Advertisement
Table of Contents
Summary of Contents for DwellStudio Mid Century Toddler Guard Rail
- Page 1 Toddler Guard Rail Garde de sécurité A. Undo the six bolts attaching the crib side to the ends and remove the side. B. Adjust the mattress support to its lowest position. C. Align the threaded holes on the guard rail with the bolts on the crib ends, then thread and tighten all six bolts.
- Page 2 WARNING FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. PREVENT BURNS. KEEP BED AWAY FROM OPEN FIRES AND OTHER HEAT SOURCES. ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN. (690 MM.) BY 51-5/8 IN.
- Page 3 MISE EN GARDE LE NON RESPECT DES MISES EN GARDE ET DES INSTRUCTIONS D'ASSEMBLAGE POURRAIT RÉSULTER EN DES BLESSURES GRAVES OU MORTELLES. LIRE TOUTES LES INSTRUCTIONS AVANT D'ASSEMBLER LE LIT DE BÉBÉ. CONSERVER LES INSTRUCTIONS POUR UN USAGE FUTUR. PRÉVENIR LES BRÛLURES. GARDER LE LIT LOIN DU FEU ET DES SOURCES DE CHALEUR.
Need help?
Do you have a question about the Mid Century Toddler Guard Rail and is the answer not in the manual?
Questions and answers