MoistMaster E35 BT Quick Start Manuals

MoistMaster® E35 BT
Quick Start Guides
The complete installation and operating
instructions can be found at
Read them and these Quick Start Guides carefully.

Commissioning of the Indoor Moisture Control Unit:

●
Connect the sensor cable to the controller.
Place the controller in the wall socket so that the indicator lights
●
flash. In this case, the automatic control starts.
●
Attach the measuring sensor in the wall at height of about one
meter in a way that the measuring head opening is facing the
room
●
Plug the heater into the socket on the controller.
●
To test the function, briefly press the button on the controller,
the "ON" light will come on and the heater will start operating
when the button is pressed.
●
A minimum temperature of 5
deactivated from the controller. Other settings must be
made with MoistMaster BlueTooth- application.
●
When the minimum temperature of 5
on the controller lights up.
●
If desired, follow the instructions in this manual to install MoistMaster
BlueTooth -application. You can also use the controller without the
application.
Version 01-2022
www.moistmaster.fi
o
C can be activated and
o
C is set, the "≥ 5
o
C" indicator light