Advertisement
Quick Links
6-Point Bamboo Coffin Assembly Guide
1) Remove the coffin from the box and
place it on a table or trolley.
3) Take the two loose shoulder
panels, set these according to
Color code dots are
located under the
shoulder and leg
panels.
Package Contents:
1 Coffin, 6 Pins, 1 Lining, 1 Pillow.
Two-person assembly suggested.
the color code dots:
Black goes to black,
green goes to
green, etc.
5) Repeat step 4 for each side of the coffin
Continued on other side
2) Untie the binding jute
strap, then place internal mat,
lid, lining, pillow and
pins to one side.
4) Working at the foot, raise panels, place
them into the space between the locator
and the jute trim, align eyelets and firmly
insert each pin until it sits flush at the top
edge of the panel.
.
Advertisement
Summary of Contents for PASSAGES 6-Point Bamboo Coffin
- Page 1 6-Point Bamboo Coffin Assembly Guide Package Contents: 1 Coffin, 6 Pins, 1 Lining, 1 Pillow. Two-person assembly suggested. 1) Remove the coffin from the box and place it on a table or trolley. 2) Untie the binding jute strap, then place internal mat, lid, lining, pillow and pins to one side.
- Page 2 Continued from other side. 6) Pull the toggles to tighten 7) Secure the handles in the string and lock the place through the string toggles into place as shown. Repeat loops, pull the end of the string inside the coffin to for each toggle.