DETON MD Series Owner's Manual

DETON MD Series Owner's Manual

Advertisement

jfDeETON
PROFESSIONAL
SOUND
SYSTEM
MD
SERIAL
PROFESSIONAL
MIXERS
MD82/MD82A/MD122/MD122A
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD Series and is the answer not in the manual?

Questions and answers

Summary of Contents for DETON MD Series

  • Page 1 jfDeETON PROFESSIONAL SOUND SYSTEM SERIAL PROFESSIONAL MIXERS MD82/MD82A/MD122/MD122A OWNER’S MANUAL...
  • Page 2 OPERATION CONVIENT THEY MIXERS. DEVELOPED NEWLY MIXERS SIGNAL SERIES DIGITAL MICROPHONE, NOISE GAIN HIGH FUNCTION. FROM PERFECT DEMANDS ALL KINDS MEET POTENTIOMETER SLIP AND100MM PROCESSOR(DSP) USERS. SHOCK ELECTRIC RISK OPEN DO NOT SHOCK TREVENT ELECTRIC COVER REMOVE DO NOT SERVICEABLE USER BACK.NO SERVICING...
  • Page 3 A.CHANNEL SECTON All channels mixers & powered mixing consoles Therefore same. ,this manualshows the control functions only channel. 1.MICROPHONE Electronically Microphone inputs accept standard male connector. 1.GROUND=shield, 2.HOT=signal input, 3.COLD=ground(shield). 20-60dB according signallevel by GAIN control. 2.LINE INPUT USING BY 1/4"standard line connector, unbalance(tip/sleeve)
  • Page 4 SECTION MASTER BALANCED BUSSES MASTE LEFT &RIGHT 4.THE OUTPUT JACK. 1.GROUND(shield) 2.HOT 3.COLD UNBALANCE BUSSES RIGHT MASTE LEFT & 2.THE JACK VOLUME CHANNEL sleeve=GROUND(shield) Tip=signal+ ring=ground- LEVEL DISPLAY 3.MASTER levels which shows output VU-meter This is level condition working of left and right channel output...
  • Page 5 C.AUX SECT 1.AUX INPUT It's 1/4" stereo it is jack, to be connectedwith stereo effect equipments other external auxiliary signal. Tip=left signal ring=right signal sleeve=negative 2.AUX OUTPUT This jack is to be connected with input jack monitor when amplifier using separate monitor amplifier.
  • Page 6 D.EFFECT SECTION RETURN EFFECT 4/2. LEFT RIGHT with other external to be connected These processor. MIC INPUT JACK 3.TALKBACK with movable microphone This be used jack input. 1.GROUND=shield, 2.HOT=signal 3.COLD=ground(shield) CONTROL LEVEL 4.TALKBACK talkback being input level knob. By adjusting CONTROL DISTRIBUTION SIGNAL...
  • Page 7 “MODE MD82 MD82A MD122 MD122A CONDITON -60dBm~-40dBm -60dBm~-40dBm -60dBm~-40dBm -60dBm~-40dBm PAD ON: PAD ON: Input Sensitivty -40dBm~-20dBm -40dBm~-20dBm -40dBm~-20dBm -40dBm~-20dBm Mic-60dBm Mic-60dBm Mic-60dBm Mic-60dBm Line-20dBm Line-20dBm Line-20dBm Line-20dBm Eff Ret -20dB Eff Ret -20dB Eff Ret -20dB Eff Ret -20dB Nomins! Level Input...
  • Page 8 lfDeETeON PROFESSIONAL SOUND SYSTEM...

This manual is also suitable for:

Md82Md82aMd122Md122a

Table of Contents