NS-R2001_10-1254_MAN_ENG.book Page 3 Friday, February 11, 2011 7:43 AM
Insignia NS-R2001 AM/FM Stereo Receiver
Remote control
Item Description
Function
ON/STANDBY button
1
Press to turn the power on to your stereo
receiver. Press again to put the stereo
receiver in standby mode.
SPEAKER A and SPEAKER B
2
Press to switch to speaker A or speaker B.
buttons
3
Number buttons
Press to enter a preset number.
PRESETS button
4
Press to scan preset stations in order. Press
again to stop scanning.
MONO/STEREO button
5
Press to switch to mono or stereo mode.
MUTE button
6
Press to mute the sound from your receiver.
Press again to restore the sound.
7
TUNE
Press to tune the radio to a lower or higher
/
buttons
frequency.
8
Press to tune the radio to the previous or
PRESET
/
buttons
next preset station.
BASS –/+ buttons
9
Press to decrease or increase the bass.
TONE DIRECT button
10
Press to bypass the tone circuitry of your
receiver.
STANDBY button
11
Press to turn your receiver to standby mode.
DIMMER button
12
Press to adjust the brightness of the display.
SLEEP button
13
Press to cycle through the available sleep
timer intervals (from 10 to 90 minutes).
MEMORY button
14
Press to memorize a preset station. Press
and hold to automatically memorize as
many as 30 FM stations.
15
Input selector buttons
Press to select your receiver input source.
16
Press to increase or decrease the volume.
VOLUME
/
buttons
TREBLE –/+ buttons
17
Press to decrease or increase the treble.
BALANCE L/R buttons
18
Press to adjust the balance to the left or
right.
Package contents
• Receiver
• Remote control
• AAA batteries (2)
• Indoor AM antenna
• Indoor FM antenna
• User Guide
• Quick Setup Guide
Setting up your receiver
Finding a location for your receiver
• Install your receiver on a stable flat surface.
Position your receiver so that it can have a direct
line of sight to the remote control.
• Do not expose your receiver to extremes of
temperature or humidity.
• Avoid placing your receiver on a hot surface such
as on top of other hot running equipment. Make
sure that there is adequate ventilation to your
receiver.
Caution
Do not install this receiver in a confined space such as
a bookcase.
Note
Connect the AC cord only after the speakers,
antenna, and all optional equipment have been
connected. Never make or change any connections
with the power turned on.
Connecting devices
Warning
Do not plug the AC cord into the AC outlet until all
connections are completed.
Notes
Be sure to observe the color coding when connecting
audio and speaker cords.
Make connections firmly and correctly. Failure to do
this can cause loss of sound, add noise to the sound,
or damage your receiver.
Connecting the antennas
Indoor AM antenna
www.insigniaproducts.com
Indoor FM antenna
3
Need help?
Do you have a question about the NS-R2001 and is the answer not in the manual?