Do you have a question about the SLDY0014W and is the answer not in the manual?
Questions and answers
Summary of Contents for SensLights SLDY0014W
Page 1
SLDY0014W No Wiring …. No electricity! Solar Powered wall Light SLDY0014W Product name: Housing Material Engineering plastics +PC Product size: 20 cm x 20.9cm x21.8 cm Body Color black Solar Panel 3.5W high-efficiency Polycrystalline PV module Battery maintenance free 1PC Ni-Mh 2000mAh batteries...
Page 2
SLDY0014W 8-10hours,battery capacity providing 2- Working time 3continuous cloudy or rainy days backup Temperature Range -40 -- +60 Degree Protection IP44 No Wiring …. No electricity! Location of the Solar Light 1) The solar light must be located in a position where it can get direct sunlight on the solar panel, and generally free from cover and shade.
Page 3
SLDY0014W Operation 1) Turn the button to the “LOW/HIGH” position so that the batteries can fully charge before use. 2) After the initial 2-day charging period, your solar lights are ready for use. Your light will now function automatically. Replacing the Batteries 1) Take off the 4 screws with screwdriver and replace the old Ni-Mh batteries.
Page 4
SLDY0014W Trouble Shooting If your solar light does not come on at dusk despite observance of all the instructions, please try the following steps: Make sure that the solar light is not being affected by any other light source. Ensure the solar light does not stand in the shade during the day.
Need help?
Do you have a question about the SLDY0014W and is the answer not in the manual?
Questions and answers