LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL Document No. IOM-LAI-001 Document Title LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL Revision No. Number of Pages REVISION HISTORY DATE DESCRIPTION OF CHANGES PREPARED CHECKED APPROVED 26.11.2018 ISSUED FOR REVIEW NOTES IOM-LAI-001 REV.
Page 3
Controller. The Levikos M18 Controller is engineered to provide a dedicated Single or Dual (optional) tank level management system to the end user. It is designed to withstand harsh and diverse environments. The controller incorporates a unique combination of features ensuring total reliability when it comes to tank level indication, monitoring and control.
Page 4
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 2 INDEX INTRODUCTION INDEX SAFETY SUMMARY TECHNICAL ASSISTANCE SYSTEM SPECIFICATIONS SYSTEM OVERVIEW COMPONENTS FUNCTION INDICATOR PROGRAM KEYS RELEVANT PARAMETERS TABLE INDICATOR CONFIGURATION PRE-REQUISITES PARAMETER SET-UP SPECIAL FUNCTIONS 8.3.1 ALARM TIMER 8.3.2 ALARM INITIAL BLOCKING...
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 5 SYSTEM SPECIFICATIONS 6 SYSTEM OVERVIEW MECHANICAL (ENCLOSURE) The system consists of the following components. ITEM ITEM QUANTITY DIMENSIONS………………...… 300(H) x 250(W) x 150(D) DESCRIPTION APPROXIMATE WEIGHT…….…….…………5.85 – 6.76kg Enclosure MATERIAL FINISH…………..…. STEEL PAINTED RAL7032...
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL COMPONENTS FUNCTION STROBE ENCLOSURE ITEM FUNCTION INDICATOR 240VAC/24VDC Transforms Single phase Power into Power Supply 24VDC extra low voltage power MUTE N1500 Indicator Indicates Value of sensor reading and BUTTON activates alarms...
Page 8
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 7 INDICATOR PROGRAM KEYS TYPE CODE DESCRIPTION 20mA in relation to the input The following describes the program keys that the end user value shall use to program the Levikos Indicator. PROGRAM KEY...
SETTING ALARM SET POINTS – Work Cycle From main menu use the Up or Down Key navigate The Levikos M18 is configured via the Front fascia of the & set the desired high level alarm value Indicator (see Figure 2.).
LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 8.3 SPECIAL FUNCTIONS 9 REMOTE MONITORING The Levikos M18 has 3 methods of monitoring. 8.3.1 ALARM TIMER Volt free Contacts (Low and High Level) The alarms can be configured to perform timing functions. The...
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 9.2.2 GENERAL CHARACTERISTICS HOLDING PARA- REGISTER DESCRIPTION REGISTERS METER • Optically isolated serial interface 0001 PV min Read: Minimum value of PV • Programmable baud rate: 1200, 2400, 4800, 9600, Write: not allowed.
Page 12
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL HOLDING PARA- REGISTER DESCRIPTION 0012 F key Function. REGISTERS METER Standard Model: ; 1= ; 2= 0007 Software Read: Software version. Version Write: not allowed. LC Model: If the version is V1.00, for ;...
Page 13
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 0021 Alarm 1 Preset. Range: 0035 Alarm 3 Hysteresis The minimum value is in (engineering unit) set for not differential Range: same as alarm or ( for differential alarm; 0036 Alarm 4 Hysteresis...
Page 14
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 0038 Temperature Unit. 0049 Alarm 2 Time 2 of timer (in Range: 0 to 1 seconds) 0=°C; 1=°F. Range: same as Not available on LC model. 0039 Indication Low limit. 0050 Alarm 3 Time 1 of timer (in...
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 9.3 MOXA MGATE CONFIGURATION 9.3.2 STARTING MGATE MANAGER The Moxa MGate that is used to extract information from the MGate Manager is a Windows-based utility that is used to display unit uses a software base configuration tool called configure the MGate MB3000.
LEVIKOS M18 LEVEL CONTROLLER INSTALLATION & OPERATION MANUAL 9.3.6 CONFIGURE IP ADD. & SETTINGS PARAMETER VALUE NOTES Confirm Re-type the password The Network tab is where the unit’s network settings are password alphanumeric again for confirmation. configured. modify Name, Network...
10 ORDERING INFORMATION INSTRUMENTATION ENCLOSURE SYSTEM DESCRIPTION (Note: Other Depth and Cable MODEL NO. SIZE(mm) MATERIAL Length available) LVK-S-X-X SINGLE TANK BASIC MODEL SKU: KJ308100 LVK-S-X-ETH 1 x (0-4m) Level Transducer SINGLE TANK WITH ETHERNET TCP/IP complete with 1 x 10m Cable SKU: KJ308200 LVK-S-RTU-X SINGLE TANK WITH SERIAL MODBUS...
Page 19
2 Modal Crescent (Cnr Baile Rd) Canning Vale, WA 6155 +61 (08) 9350 1000 www.alliedpumps.com.au COPYRIGHT. THIS DRAWING AND DESIGN MUST NOT BE COPIED IN WHOLE OR IN PART WITHOUT THE WRITTEN CONSENT OF ALLIED PUMPS AND AS REPRODUCED MUST CARRY ALLIED PUMPS DESIGNATION.
ALLIED PUMPS have not acted as a consultant nor charged design fees on this project, and is in no way responsible for, nor guarantee any particular level of performance of the plant supplied or effluent quality unless such guarantee is specially given in writing.
Page 21
INSTALLATION & OPERATION MANUAL alliedpumps.com.au Disclaimer: Allied Pumps reserves the right to modify the information and illustrations contained in this document without prior notice. The information provided in this document is intended to be helpful. However, this document is not intended to cover all regulations that apply to your practice.
Need help?
Do you have a question about the Levikos M18 and is the answer not in the manual?
Questions and answers