Richardson Products DynaVox WPAC User Manual

Wheelchair power adapter converter

Advertisement

Quick Links

WPAC
Wheelchair Power Adapter Converter
User Manual

Description

The WPAC is a highly efficient DC-to-DC converter that is designed
to power your DynaVox speech generating device from your
wheelchair's batteries. It connects to electronic power wheelchairs
to provide safe, clean, and regulated DC power to your DynaVox
device.

Parts List:

1- Wheelchair Power Adapter Converter
1- Input / Power cable
1- Output / Device cable

Installation and Use

Intended Use

The WPAC is suitable for services in the homecare, institution, and
transportation settings as a source of continuous or intermittent
power for any DynaVox device. The WPAC will also charge your
device during the time that it is connected and supplying power. It is
recommended that the WPAC not be left connected to a device for
long periods of time, as this could reduce the life of your DynaVox
device battery just as leaving on the DynaVox charger will do.

Mounting Considerations

The WPAC will get warm during normal operation.
positioned so that the user can never touch it.
mounted in an open-air environment, for proper ventilation.
It must be
It should be

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DynaVox WPAC and is the answer not in the manual?

Questions and answers

Summary of Contents for Richardson Products DynaVox WPAC

  • Page 1 WPAC Wheelchair Power Adapter Converter User Manual Description The WPAC is a highly efficient DC-to-DC converter that is designed to power your DynaVox speech generating device from your wheelchair’s batteries. It connects to electronic power wheelchairs to provide safe, clean, and regulated DC power to your DynaVox device.
  • Page 2 If the wheelchair can recline, the WPAC must be positioned outside of the wheelchair’s reclining motion. Connection cords should be secured as neatly and tightly as possible. This prevents any loose cords from “snagging” while the chair is in operation. Installation Step 1 Plug the Input/Power cable into the Joystick Charging Port.
  • Page 3 Troubleshooting: Light Codes Input Output Cause/Indication Solution Solid Input power connected; No Plug in proper connector Green output cord detected cord for device Solid Solid Momentary boot-up Wait 2 seconds Green Blinking Blinking Running Normal - - - Green Green Blinking Input voltage too low to Charge wheelchair...
  • Page 4 Shellev Close. Lowmoor Road interference that may cause Industrial Estate undesired operation. Kirkbv-in-Ashfield Nottinghamshire. NG 17 7ET. UK PH:44 1623 759146 FAX:44 1623 726886 Made in the USA Exclusively manufactured for DynaVox by Richardson Products Inc. 401172-B...

Table of Contents