Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Karisma FABLE
- Page 1 INSTRUCTIONS FOR USE, INSTALLATION AND ROUTINE MAINTENANCE FABLE SHAMPOO-BED...
-
Page 2: Table Of Contents
CONTENTS INTRODUCTION ................................3 PREREQUISITES ..................................4 INTENDED USE ..................................4 CONTRAINDICATIONS OF USE ............................5 DEFINITION ..................................5 SAFETY ....................................5 LIFTING AND TRANSPORT ............................5 TECHNICAL SPECIFICATIONS .............................6 TRANSPORT AND STORAGE ............................. 6 DIMENSIONS AND INSTALLATION PLAN ......................7 MIXER SPECIFICATIONS ............................8 THERMOSTATIC MIXER SPECIFICATIONS ......................8 INSTALLATION PREPARATION ................................9 WATER AND ELECTRICAL CONNECTION ......................10... -
Page 3: Introduction
This manual is designed to allow you to use the Fable shampoo-bed in the best and safest manner. It is therefore an integral part of the shampoo-bed. It must be kept carefully throughout the duration of the shampoo-bed and accompany the shampoo-bed if it is transferred to a new user. -
Page 4: Prerequisites
Side panels with LED-backlit methacrylate porthole can be chosen to make the equipment even more striking. But it is in its potentials of use that Fable reaches new heights offering the ability to span across an array of eco-natural healing, trendy, classic glamour and cross-contamination treatments, for instance, facilitated by the use of a regular or large tray, complete with special bowls. -
Page 5: Contraindications Of Use
LIFTING AND TRANSPORT The Fable shampoo-bed is supplied on a pallet, to which it is fixed through special holes on the base with four screws and nut (on the underside of the pallet), and packed in a triple-wall corrugated cardboard box. -
Page 6: Technical Specifications
TECHNICAL SPECIFICATIONS Standard specifications Unit of measure Value Minimum seat height Maximum basin height 120 (1 person) Maximum flow rate 230 - 240 Supply voltage 50 - 60 Frequency Drawn power (max.) min. Operating mode (intermittent massage *) min. 60 - 120 Operating mode (heated mattress **) Max. -
Page 7: Dimensions And Installation Plan
DIMENSIONS 2060 DETAIL A DIMENSIONS EXPRESSED IN MM INSTALLATION SURFACE STANDARD 2200 1215 ATTENTION ! ONLY ON REQUEST WATER SYSTEM INSTALLATION POSITION FOR WALL-MOUNTED VERSION 1000 RECOMMENDED RECOMMENDED HALF (MAX AREA OF USE MM 85 X 250 H) LOCATION DIMENSIONS EXPRESSED IN MM MINIMUM... -
Page 8: Mixer Specifications
A hot and cold water tap must be provided upstream of each piece of equipment for the plumbing sys- tem. Connections to the sewage drain system are established using a ø 40 mm drain pipe. WARNING: The equipment does not have a siphon so one must be provided in the plumbing system. Connection to the mains power supply is 230 V ~ 50 Hz F+N+T. -
Page 9: Installation
INSTALLATION Preparation 1) Remove upper and side parts of the packaging leaving the shampoo-bed mounted on the pallet so that it is easier to transport. Remove the shampoo-bed protections and any accessories contained in the packaging itself. Fixing the shampoo-bed ) Warning: DO NOT LIFT IN THE POINTS Lift the shampoo-bed in the indicated points to bring it closer to the pre-set point of use. -
Page 10: Water And Electrical Connection
) Establish the electrical connection (4) of the shampoo-bed to the mains conductor of a sectional switch located near the equipment. The equipment is supplied with a 1.5 m long cord and Schuko plug because it is not possible to determine the length of the power supply cable according to the require- ments of each customer. -
Page 11: Use
) Once the electrical and hydraulic connections have been completed, reassemble the mattress of the shampoo-bed by carrying out the operations in Point 3 again in reverse order. Rotate the mattress, insert the connection pins of the bed functions, push the mattress forwards engaging the rear corner to the three screws protruding from the central crossbar of the bed and fasten the locking screws. -
Page 12: Air Jet Massage Controls
Press the indicated pedal to move the backrest down Press the indicated pedal to move the backrest up Relax control pedal D5710030 (optional) Jet massage controls (optional version) The jet massage function helps to improve the feeling of well-being by stimulating blood circulation and relieving muscle tension. -
Page 13: Thermic Heated Mattress Control
Thermic system control, heated mattress (optional version) The control can be used to heat the entire length of the Fable shampoo bed, including the back part. The control panel (1) is embedded in the side of the mattress (it can be placed on the left or right side). Press- ing ON to activate the heating which is automatically timed for 60 minutes and can be interrupted at any time. -
Page 14: Using Neck Rests With Gel Balls
Using neck rests with gel balls The Fable shampoo-bed is equipped with neck support with medical gel balls that can be folded down from the horizontal position, when necessary, e.g. to rinse the hair, or to facilitate the cleaning of the basin. -
Page 15: Removing The Gel Neck Rest
Removing the gel neck rest The neck rest is made of medical gel, which together with the neck rest balls made of the same material guarantees the best postural comfort during treatments. It can be detached and reattached to the sup- port of the shampoo-bed table for cleaning or maintenance. -
Page 16: Using The Headrest/Face Cushion
Using the cushions (trapezoidal, cylindrical and semi-cylindrical) (optional) All the cushions supplied with the Fable shampoo-bed are provided with an outer layer of memory foam. The trapezium-shaped cushion is designed to support the feet to achieve even more comfort when lying down. -
Page 17: Using The Step
Using the white painted step (optional) The modular step with two risers is designed to facilitate the use of the shampoo-bed, making it easi- er for the person receiving treatment to get on and off. It is made of white painted wood and is easy to assemble. -
Page 18: Using The Service Trolley
Using the service trolley (optional) A useful accessory of the Fable shampoo-bed is the wooden service trolley on twin swivel castors, with a drawer and a chest of drawers mounted on self-centring telescopic guides to store the specific working tools and bottles containing the various treatment products. In this case, the Fable shampoo-bed has a specific structure with a special compartment, on the opposite side of the basin, for storing the trolley at the end of each treatment session. - Page 19 Washbasin unit Regularly check that there are no water leaks under the Avonite basin (solid surface). Also, check inside by raising the back portion of the mattress (1) as high as possible. Check that there are no leaks from the rear part of the aluminium casing.
-
Page 20: Identification Of The Equipment
Always quote the serial number when communicating with the manufacturer or service centres. PIETRANERA Srl Via Masaccio 2 42124 Reggio Emilia ITALIA Mod. FABLE S.N. 00 00 00 00000 230-240 V \ 50-60 Hz P 650W Massa: 130 Kg Instructions for Installation, Use and Maintenance... -
Page 21: Instructions For Disposal
INSTRUCTIONS FOR DISPOSAL Disposal of packaging The packaging material is 100% recyclable and is marked with the recycling symbol. The various parts of the packaging must not be dispersed in the environment and must be disposed of following the regula- tions of your local authorities. - Page 22 NOTE...
- Page 24 Via Masaccio, 2 - 42124 Reggio Emilia - Italy +39.0522.237010 Fax. +39.0522.514669 e-mail: info@karismabeauty.com www.karismabeauty.com REV.01...