Page 1
Doc. No: OB_DOC_DBM_A_621100 Description: The OB6211 Demo Board consists of a stereo 20W, class-D, audio power amplifier completed with a small number of external components mounted on a printed-circuit board. It can be used to directly drive speakers with an external analog audio source as the input. The audio application of 2 channels single-ended(SE) or 1 channel bridge-tied-load(BTL) is presented.
2.4.1 Quick Start List for Stand-Alone Operation Follow these steps to use the OB6211 demo board stand-alone or when connecting it into existing circuits or equipment. Connections to the demo board can be made by inserting stripped wire or using banana plugs for the power supply and output connections.
S1,S2 DIP SWITCH,2channel BTL+,BTL-,GATE _L,GATE_R,GND, Test Point Connector,red,1.32mm type GNDL,GNDR OUTL,OUTR,VCC PCB: AUOB6211. OB6211 EVM PCB, double layer 82*71*1.6 1 00 1245 ICs: audio amplifier HSOP28 OB6211 * For different speaker impendence application, recommended L1,L2,C10,C17,C12,C19 value, please refer to datasheet.
Page 12
AUOB6211.00 1245 Disclaimer On-Bright Electronics reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its documents, products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.