Advertisement
Advertisement
Table of Contents
Summary of Contents for Seepoint Curve LTE
- Page 1 Quick Start Guide Curve LTE®...
- Page 2 Contents: Overview: Setup: KioWare Guide: Connecting your LabelWriter Printer: Loading Labels: Contact Us:...
- Page 3 Overview: Curve LTE Kiosk CAMERA 15.6”/21.5” LCD TOUCH SCREEN BARCODE READER (OPTIONAL) DYMO LABELWRITER (OPTIONAL) WIFI ANTENNA POWER INPUT 110 VOLT, USB & ETHERNET PORT...
- Page 4 Setup: Plug in the power cable, and your unit should boot into seepoint desktop. Go ahead and connect to your WiFi. • If you ordered KioWare please follow kioware guide. WiFI ON SCREEN KEYBOARD...
- Page 5 1234 for Network window. Go ahead and connect to your WiFi network. 2619 to exit KioWare. This will take you to the Windows login Screen. From Windows login screen you can select User: Admin/SeePoint to login to windows desktop or back to KioskUser. Password: seepoint...
- Page 6 Connecting your LabelWriter Printer: Do not connect the printer to your computer until after the software installation is complete. Download and install the latest version of DYMO Label software from support.dymo.com. To connect the power 1. Plug the power cord into the power adapter. 2.
- Page 7 Loading Labels: To load a label roll 1. Place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is firmly against the side of the spool. 2. Press the spool guide tightly against the side of the label roll, leaving no gap between the roll and the spool.
- Page 8 Contact Us: IF YOU HAVE ANY QUESTION PLEASE REACH US AT: (310) 725 - 9660 SeePoint, LLC. www.SeePoint.com support@seepoint.com 2619 Manhattan Beach Blvd. Redondo Beach, CA 90278...
Need help?
Do you have a question about the Curve LTE and is the answer not in the manual?
Questions and answers