Table of Contents
Summary of Contents for HOTKNIFE HK100
- Page 1 USE MANUAL HOT KNIFE FOAM CUTTR HK100(100W) / HK150(150W) / HK200(200W) / HK250(250W) 1. SAFETY WARNINGS 1.1 INTENDED USE 2. INSTALLATION 2.1 CHANGING BLADES 3. OPERATION 3.1 INSTRUCTIONS 4. NAINTENANCE 5. DISPOSAL OF WASTE www.hotknife.cc...
- Page 2 The hot knife cutter can noly be operated on fabric/webbing. Do not use with other materials. Do not use to warm up liquids. 2. INSTALLATION The machine can only be used when all the replaceable blades are completely pre-assembled. www.hotknife.cc...
- Page 3 3. OPERATION Set thermometer(004)to a moderate temperature,move regulator forward to increase the temperature and backward to decrease it(see the following picture as reference). Put a blade(003)onto operating platform,then make sure the borrom side switch(005)is on before cutting. www.hotknife.cc...
- Page 4 ■ Do not use any aggressive detergents and resolvents. ■ Store the machine in a clean,dry and warm plece. 5. DISPOSAL OF WASTE To dispose of this cutter please contact your dealer or use a local recycle bin. www.hotknife.cc...
- Page 5 Do not dispose of the machine with other household waste. 6. SPECIFICATIONS (see specifications below as reference since most machines vary) Voltage 220V-240V 110V-120V Power 100W120W 200W 250W Operating Temperature 50-500℃ Size & Weight 240x45mm, 400g Accessories Blade/Wrench/Brush/Box Official Website: www.hotknife.cc Email: info@hotknife.cc www.hotknife.cc...
Need help?
Do you have a question about the HK100 and is the answer not in the manual?
Questions and answers