Advertisement
Quick Links
Advertisement
Summary of Contents for BAGNODESIGN BDB-MAL-53175-A-WH
- Page 1 Freestanding Bath Tub Installation Guide BDB-MAL-53175-A-WH...
-
Page 2: Important Please Read
Important Please Read Remove all packaging and check the product for missing parts or damage before starting installation. Any alterations made to this product and fittings may infringe water regulations and invalidate the guarantee. The Installation must comply with all Local/National Water Supply Authority Regulations/Byelaws and Building and Plumbing Regulations. - Page 3 BDB-MAL-53175-A-WH...
- Page 4 Step 1 Remove the bath from the box and carefully unwrap the protective packaging. Step 2 Ensuring that the area the bath will be located is level, lift the bath into its final position. Check that the bath is sitting level to the finished floor and not rocking. The bath is supplied with adjustable legs, if required these can be adjusted with a spanner.
- Page 5 Step 5 Locate the outer panel in its final position. Mark out the floor and drill the finished floor and secure the outer panel into position using the provided screws. Pre drilled holes can be found in the base of the panel Note: Prior to drilling please consider any pre-installed water proofing.