1. Manuals
  2. Brands
  3. axelbloom BEDS Manuals
  4. Indoor Furnishing
  5. Austroflex Savia
  6. Assembly instructions

axelbloom BEDS Austroflex Savia Assembly Instructions

Bed frame with headboard
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

TIPS BEFORE STARTING:

1. We recommend that two people help you to assemble the bed.
2. Please open all boxes and compare the bed frame components with the pictures in this document
before starting to assemble the bed.
3. If you are uncertain at all, please call us. Offi ce (toll free): 866-696-8387 After Hours: 310-339-1222
fi g. 1
1
Assembly Instructions:
Au
Austrofl ex Savia Bed Frame
A. Lay headboard fl at on the fl oor, brackets facing up.
(fi g. 1)
B. Make sure the small silver screws are screwed into
the headboard (these are what the side boards attach to).
There are four screws in total.
C. Attach the side boards to the headboard (fi g. 2):
•
Make sure the arrows on the circular metal fasteners
are lined up with the bolts in the headboard. If arrows
are not lined up, sideboards will be prevented from
attaching.
•
Using the provided large silver allen wrench, turn the
circular fasteners clockwise until they are secure.
fi g. 2
(with headboard)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Austroflex Savia and is the answer not in the manual?

Questions and answers

Related Manuals for axelbloom BEDS Austroflex Savia

Summary of Contents for axelbloom BEDS Austroflex Savia

  • Page 1 Assembly Instructions: Austrofl ex Savia Bed Frame (with headboard) TIPS BEFORE STARTING: 1. We recommend that two people help you to assemble the bed. 2. Please open all boxes and compare the bed frame components with the pictures in this document before starting to assemble the bed.
  • Page 2 E. Carefully lift bed frame and lay fl at on the ground. F. Affi x foot board to side boards using metal corner braces. Do not fully tighten screws until all are partially screwed in. (fi g. 3 & 4) fi...
  • Page 3 G. Raise bed frame so that head board is again laying on its back. (fi g. 5) fi g. 5 fi g. 6 H. Use long gold screws to affi x metal feet to all four corners of frame. (fi g. 6 & 7) *TIP: Be sure to line up feet fl...
  • Page 4 I. Lay frame back onto fl oor, and affi x center beam at desired height. (fi g. 8) (See attached sheet for center beam assembly instructions) J. Attach L-shaped metal brackets (4 total) to metal face plates on side boards, making certain to clip them on at the same height as the center beam.

Table of Contents