Cerberus Networks Snom 370 Setup Manual

Set-up Guide
Snom 370 Handset for MyCloud Lync and Unfied Comms
1. Initial Phone Config
1.1.
Turn on phone
1.2.
Allow phone to request IP from DHCP, and watch for the IP it picks up (displayed on screen during
bootup)
1.3.
Progress through time zone, language setup etc.
1.4.
Press Settings button on phone, scroll down to Maintenance, press tick, scroll down to Administrator
Mode, press tick, type in PIN which is 0000 by default, tick.
2. Browser Config
2.1.
Open up browser and browse to the IP that the phone picked up during boot time (if missed, it is present
in the Settings > Maintenance > System Info screen).
2.2.
Click on Setup >UC Account Data
2.3.
Enter SIP-URI in the form of your SIP account, e.g. dominic.demo@ecsdemo.co.uk
2.4.
Enter Username
ECLOUDSERV\dominic.demo_ed
2.5.
Note, once you press Apply you will be prompted for a Username/Password by the browser – the
username/password, which was previously blank, is now the same as the Username/Password you just
entered, INCLUDING the domain e.g. ECLOUDSERV\Dominic.Demo_ED and PASSWORD.
2.6.
Now click on Identity 1
Continues overleaf
Cerberus Networks Ltd, 9 Walmgate Road, Greenford, Middlesex, UB6 7LH, t. 0845 257 1333, e. info@cerberusnetworks.co.uk
in the form of your DOMAIN\Username_CustomerShortCode,
1 of 2
e.g.