Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Derpras DPMB168
- Page 1 Derpras Enjoy a wonderful life DPMB168 Derpras E-mail:Derpras@qq.com...
-
Page 2: Product Features
After you have done above cleaning, if the led display still can't work, please contact us for help. • Whether you encounter any problems, such as leakage, parts damaged, device can't work properly, etc, we will help you to solve these problems without dismantling the device. What you need to do is "contact us at derpras@qq.com"... -
Page 3: Installation Dimension
INSTALLATION DIMENSION 7.87''(200mm) 7.87''(200mm) 13''(330mm) 7.09''(180mm) Φ=5.91''(150mm) - Page 4 Tools Thread seal tape Any questions please email to derpras@qq.com email to derpras@qq.com...
-
Page 5: Package Includes
Package includes: Derpras... -
Page 6: Overall Layout
Overall layout：... -
Page 7: Installation Notes
Installation notes: • Before installation, flush the water supply pipes thoroughly to remove debris. Flush for at least 3 minutes.Switch off main shut-off valve before installation. • Especially please put the Thread Sealant Tape(comes with the products) around all threads when installation. - Page 8 • Connect the shower pipe(3) to the main pole(16) and screw them together. • Confirm the position of the fixing rod (14),and install the fixing rod (14). First,try to connect the main pole(16) to the main body(5),but do not tighten completely. (Note:Make sure place the (4)),Second,try to place the fixing rod (14) to fix the main pole, and confirm the position of the fixing rod (14).Third, remove the main pole(16) and install the fixing rod (14).
- Page 9 • Install the main pole(16) and fix the main ploe(16). First ,again,connect the main pole(16) to the main body(5),but do not tighten completely. (Note:Make sure place the (4)).Second, docking the main pole(16) to the fixing rod (14). Third,tighten the main pole(16) to the main body(5) and tighten the two screws of fixing rod (14) to fix the main pole(16).
-
Page 10: Cleaning Instructions
Do not use abrasive cleaners or solvents on Derpras faucets and fittings. • In the premise of water pressure greater than 29Psi, if you find the LED display does not work or the water flow becomes very small,please following the video link to clear the impurities: https://youtu.be/WMyg4WHwdyc...
Need help?
Do you have a question about the DPMB168 and is the answer not in the manual?
Questions and answers