Safe-Strap Shop-Along Harness Replacement Instructions

Shop-Along
Step 1:
Find the 2 long pieces of the harness. Start with the
left hand side of the seat. Loosen and remove one
screw from the fi rst plate. Insert loop of the new belt
under the plate. Tighten and replace the screws.*
Repeat for right hand side of the harness.
Step 3:
Find the 2 shorter ends of the harness (the side
pieces). These should be the only pieces not con-
nected yet. Make sure the buckles are facing outward
and that the text on the buckles is readable. Loosen
and remove one screw from the plate.* Insert loop of
the new belt under the plate. Tighten and replace the
screws. Repeat for right hand side of the harness.
Make sure the two buckles clip together.
Repeat for other side of the Shop-Along.
SAFESTRAP.COM
©Copyright 2016 Safe-Strap Company, LLC. All rights reserved.
Harness Replacement
®
Instructions
Make sure you have 2 Shop-Along Harnesses to install correctly.
800.356.7796
Step 2:
Find the crotch strap on the belt. Loosen and re-
move one screw from the bottom middle plate.*
Place the crotch strap (bottom strap) loop
through the bottom plate in the middle of the left
side seat. Tighten and replace the screws.
Final installation should look like this.
*For detailed instructions on removing screws and
plates see page 2.
973.442.4623 info@safestrap.com
rev 2016/01-cjf