Advertisement
Advertisement
Table of Contents
Summary of Contents for GasKnight Pro
-
Page 2: Get Started
2. Remove the door of the battery compartment on the back of the detector. 3. Remove the 4 AA 1.5V batteries (which came included with your GasKnight Pro) from their package. 4. Insert all 4 AA batteries into the battery compartment ensuring they are correctly matched + with positive and –... - Page 3 1. Turn the sensitivity dial to the halfway point or slightly less than the halfway point between the maximum sensitivity (+) and minimum sensitivity (-). 2. Press the power button to turn on the GasKnight Pro. Note: After first turning on, the detector will be alarming and you will hear a constant ringing sound.
-
Page 4: Gas Detection
Maintenance Replacing the Battery: If the “Ready” light is Yellow, the GasKnight Pro is low on battery and it is recommended to replace the batteries as soon as possible. If the “Ready” light is not illuminated, the battery has expired and you must replace the batteries in order for the unit to work. -
Page 5: Additional Features
Low Battery Level 4±0.2V Humidity 10-90% RH (non-condensing) Model GM8800B Certifications CE, FCC, RoHS Compliant Compliance Standards Met JG693-2004, GB3836.1-2010, GB3836.4-2010, GB4208, CE EU Standard Explosion-Proof: Ex ib IIB T3 Gb Hose Length 15.5 Inches Operating Environment Temperature (32~120°F) 0~50°C Power 4 X 1.5V AA Alkaline Batteries Working Current... -
Page 6: Warranty Claims
Warranty Claims? Contact us at www.Warranty.GasKnight.com Questions? Comments? Concerns? Call us at +1 224 477-5846 or Email us at Hello@GasKnight.com Copyright © 2020 Chicago Superior Products, LLC All rights reserved. No portion of this book may be copied or reproduced in any way without prior written...
Need help?
Do you have a question about the Pro and is the answer not in the manual?
Questions and answers