Summary of Contents for Elefine EF-DZJ10S
- Page 1 EF-DZJ10 AC Boom Barrier User's Manual Issue Date: 2021.08 Shenzhen Elefine Technology Co., Ltd. www.elefinetech.com...
-
Page 2: Table Of Contents
7.5)Electricity Adjustment and Attentions length (second) (meter) Model Description (L≦meter) L ≦ 4 m 0.83 Medium speed, straight EF-DZJ10S mon Malfunctions and Solutions L ≦ 4m EF-DZJ10F 0.83 90°Folding boom 9)Packing List 10)Service Items Appendix Attention: please read this instruction before installation! - Page 3 Notice: The "Boom Height" means height from the boom holding point to the ground...
- Page 4 3) Functions and Features 5)Machine core The humanized clutch device: In case of power off, unlock the clutch device and raise the boom manually. By the time the power is supplied, lock the clutch device to make it Boom tray working normally again.
-
Page 5: Installation For Mechanism Part
6) Direction rule 7) Installation, debugging and usage The right-side fixed barrier gate installation rule: Installation of mechanism part 7.1.1) Please select the right type of the barrier gates according The bar inside the gate to the specifications of the place. Fix the barrier gate case board with expansion bolts(refer to the fig.3) Expansion bolts Reference size... - Page 6 Debugging and use of the mechanism(cautions:turn off the power before setting) Nut 1 of shock absorption screw 1 Unsteady Clutch axis Fig.5(Cautions: turn off the power before setting) Remove the coping Barrier case cover Boom tray Lock screw Shock absorption rubber Fix screw Link pole...
- Page 7 (E-b) Repeat Step( E-a). (F-a-1) Refer to Fig.9-1, fall down the arm, and then adjust the (E-c) If the balance spring has been adjusted to the tension, the shock absorption screw 2 to make the boom in the horizontal position. If it doesn't work, try the next step. problem still could not be solved.
-
Page 8: Springs Selection, Installation And Adjustment 1
(B) Spring installation Spring selection, installation, and adjustment (B-a) Selcect a suitable spring together with the screw mandrel (A)Spring selection and insert them into the spring sleeve. (B-b) Put the whole assembled sleeve into the spring bracket. (B-c) Make the screw mandrel connected to the balance crank A. -
Page 9: Installation And Connections Of The Electric Part 1
Installation and connections of the electric part(refer (C-e) Insert the screw mandrel again and fix it to the selected to Fig.12) link hole. (C-f) Rise up the boom to the vertical position again and make sure the boom will not fall down. (C-g) Install the adjusting nuts and the baffle ring in the lower Electrical Connections part of the screw mandrel and adjust the press to the... - Page 10 (A) 220V(110V) power connection: (H) Terminal special for motorcade: Remove wiring terminal cover and connect power wire to [Power input If the users have installed the loop detector, and do not want the interface board]. barrier boom fall down automatically when there are still some cars (B) Traffic light (R&G light) connection: in line behind the passing car.
-
Page 11: Packing List 1
8) Common malfunctions and solutions (7) If the user changes a new control board and the boom is abnormal (1) Motor works but there is no reaction on the arm when rising and falling. a. Please adjust the "Gate Type Selection"(Refer to the control board). a. -
Page 12: Service Items 1
10) Service items (1) One year's free servicing is supplied(not including the arm); (2) Lifetime charged servicing is offered. Right side Left side (3) Technology servicing is supplied. The following situations are charged for servicing(or changing): Bottom (1) Broken by wrong installation. 2) Installation of the infrared photocell (2) Broken by improper voltage. - Page 13 the laser obstacle, so as to make the boom be perfectly vertical. (2) The blue laser obstacle on the spindle near the boom is the laser obstacle to stop the boom after it lies horizontally: When the boom is at the rising limit position, adjust this laser obstacle to make it point upwards and form an angle (90°) with the arm.
Need help?
Do you have a question about the EF-DZJ10S and is the answer not in the manual?
Questions and answers