Advertisement
Quick Links
ART. NO.
101300-120-2-ddd
101301-120-2-ddd
101303-120-2-ddd
101304-120-2-ddd
Sircular
INSTALLATION MANUAL
Safety Notes:
• The product must be installed, maintained,
and operated as instructions below.
• Before starting installation of this product,
make sure power supply is disconnected.
• Only to be installed by authorized electrician.
• Do not use abrasives or solvents when cleaning.
• Do not install the product if it appears damaged
in any way. Check with manufacturer if in doubt.
• Do not modify this fitting in any matter as this will
void warranty.
• Check protection class, if class I, it must be earthed.
• Disconnect power supply before maintenance or cleaning.
Imported by Norlux AS | Borgeskogen 32, 3160 Stokke, Norway | norlux.com
Sikkerhetsinformasjon:
• Følg installasjonsmanual for korrekt montering.
• Koble alltid fra strømmen før montering eller
vedlikehold.
• Kan kun monteres av autorisert elektriker.
• Monter ikke produktet hvis det er synlig skade.
Kontakt forhandler eller produsent.
• Bruk ikke løsemidler ved rengjøring
• Produktet skal ikke under noen omstendigheter
endres eller modifiseres.
• Sjekk produktets isolasjonsklasse.
Ved isolasjonsklasse I skal produktet jordes.
Advertisement
Related Manuals for NORLUX Sircular
Summary of Contents for NORLUX Sircular
- Page 1 • Sjekk produktets isolasjonsklasse. • Check protection class, if class I, it must be earthed. Ved isolasjonsklasse I skal produktet jordes. • Disconnect power supply before maintenance or cleaning. Imported by Norlux AS | Borgeskogen 32, 3160 Stokke, Norway | norlux.com...
-
Page 2: Pendant Installation
PENDANT INSTALLATION... - Page 3 ASSEMBLY INSTRUCTIONS - SIRCULAR Ø3060MM 1. Splicing the profiles - install the connectors (24pcs) Step 1. Step 2. Finished 2. Install the PC cover Warning: If the PC cover needs to be pulled out from the profile, do it like this.
- Page 4 3. Install the suspension cables (6pcs). Ø3000mm Finished 4. If needed, fill the gaps with filler. Fill the gap with our filler. Make the filler smooth with a knife. Finished...
- Page 5 ASSEMBLY INSTRUCTIONS - SIRCULAR Ø2060MM 1. Splicing the profiles - install the connectors (16pcs) Step 1. Step 2. Finished 2. Install the PC cover Warning: If the PC cover needs to be pulled out from the profile, do it like this.
- Page 6 3. Install the suspension cables (8pcs). 4. If needed, fill the gaps with filler. Fill the gap with our filler. Make the filler smooth with a knife. Finished...