Summary of Contents for STREAMCORE SG 850e
- Page 1 IG_SG850E-SG1600E-SG3200E_EN-R0 Streamcore.com Page 1 on 16 2021 Streamcore SAS - All rights reserved...
-
Page 2: Table Of Contents
Manually load a Boot version ......................... 15 Description of the cables ........................16 6.3.1 Asynchronous cable ..............................16 6.3.2 Straight Ethernet cable ............................. 16 6.3.3 Crossover Ethernet cable ............................16 Streamcore.com Page 2 on 16 2021 Streamcore SAS - All rights reserved... -
Page 3: Introduction
*** Required for the caching feature and used for manual requests from the boot menu (ping…) 2. Connect the cables and start the StreamGroomer (chapter 4) 3. Check the connectivity (chapter 5) Streamcore.com Page 3 on 16 2021 Streamcore SAS - All rights reserved... -
Page 4: Description
If the two LED 100 AND 1000 are on, the Bypass is "closed": traffic goes directly from one port to the other without being processed by the SG. The SG acts as a crossover cable. Streamcore.com Page 4 on 16 2021 Streamcore SAS - All rights reserved... -
Page 5: Sg 3200E
If the two LED 100 AND 1000 are on, the Bypass is "closed": traffic goes directly from one port to the other without being processed by the SG. The SG acts as a crossover cable. 2.2.1.2 REAR PANEL Power supply 1 Power supply 2 Streamcore.com Page 5 on 16 2021 Streamcore SAS - All rights reserved... -
Page 6: Configuring Boot Ip Parameters
Speed 38400 bit/s, no parity, no flow control, 1 stop bit, 8 bits of data. Press Enter key. The following screen appears: Initial login Enter user name (login): boot and a password: boot. Streamcore.com Page 6 on 16 2021 Streamcore SAS - All rights reserved... -
Page 7: Maintenance Menu (Default)
Presents the admin routing table of the SG show version Presents the type of the SG, its serial number, the installed and activated version of the SG Streamcore.com Page 7 on 16 2021 Streamcore SAS - All rights reserved... - Page 8 : BOOT S15-1e2252a392b5 SG flash type : M4G64 SG type : SG850e Serial number : R64T8426 Installed versions Partition S : S15-1e2252a392b5 Partition A : 6.0.04-056fb620c05a Partition B : None Streamcore.com Page 8 on 16 2021 Streamcore SAS - All rights reserved...
-
Page 9: Configuration Menu
Present the routing table of the SG show version Present the type of the SG, its serial number, the installed and activated version of the SG Streamcore.com Page 9 on 16 2021 Streamcore SAS - All rights reserved... -
Page 10: Configure Streamgroomer Boot Ip Parameters With A Usb Key
Download the boot file on the local host Transfer the boot file on an USB key (by email, FTP... or directly from the local host) Plug the USB key on the SG Reboot the SG Streamcore.com Page 10 on 16 2021 Streamcore SAS - All rights reserved... -
Page 11: Prepare The Boot File In Streamview
• Click OK and follow path to where the USB key is plugged in. A boot file can be saved on the USB key at the root or in a directory called "Streamcore". The file name is called sgconfig_<sgname>.txt. 3.3.3 Insert USB key into StreamGroomer and reboot In order to download IP boot parameters into a StreamGroomer with the USB key: ... -
Page 12: Wiring / Start
SG. The SG acts as a crossover cable. CONNECTIVITY IN ANY ARCHITECTURE A StreamGroomer is usually placed in an inline position between the router and the LAN: Streamcore.com Page 12 on 16 2021 Streamcore SAS - All rights reserved... - Page 13 StreamGroomer is connected between two routers, or between a router and a firewall, 2 crossover cables should be used. High availability wiring: Tandem, Dual and 4 ports solutions Streamcore.com Page 13 on 16 2021 Streamcore SAS - All rights reserved...
-
Page 14: Checking The Connectivity Of The Sg
Remark: With a computer connected to the console port of the SG, it is also possible to check whether the SG can reach the SGM by sending a ping from the BOOT menu. Streamcore.com Page 14 on 16 2021 Streamcore SAS - All rights reserved... -
Page 15: Appendix
Wait for the operational software reboot and the opening of the bypass • Turn off the StreamGroomer • Turn on the StreamGroomer • The equipment will then automatically restart in boot software. Streamcore.com Page 15 on 16 2021 Streamcore SAS - All rights reserved... -
Page 16: Description Of The Cables
6.3.3 Crossover Ethernet cable Male RJ45 / RJ45 plugs Red-colored Length 2 m Category 5 or 6, 100 Ohms UTP Pinning: 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8- Streamcore.com Page 16 on 16 2021 Streamcore SAS - All rights reserved...
Need help?
Do you have a question about the SG 850e and is the answer not in the manual?
Questions and answers