Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for DYNAMIC DIAMOND TOOLING DDV26
- Page 1 DYNAMIC DIAMOND VACUUM DDV26 Vacuum Manual...
- Page 2 1. These instructions are only for DDV26 Dust Extractors. 2. DDV26 Dust Extractors are designed to clean construction areas and be connected to small and medium machines such as drills, grinders etc. The machine is suitable for picking up dry, non-flammable dust and debris in and indoor environment.
-
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: WARNING – To reduce the risk of fire, electric shock or injury: Cables damaged through crushing or splitting can be dangerous if used and should be replaced ... - Page 4 THERMAL PROTECTION The dust extractor is equipped with a safety thermal protector to prevent motor from overheating. Should thermal protector activate, turn off machine, unplug power cord and check for full dust bag, vacuum hose clog or filter blockage. It may take up to 45 minutes for the thermal protector to reset.
- Page 5 This can be done by hitting the dust through the bag or tapping the tank using i.e. a rubber hammer. 4. HEIGHT ADJUSTMENT(Optional) DDV26/DDV36 WITH HEIGHT ADJUSTMENT SYSTEM: Lifting operating: Grip the 2 handles on barrel, lift to the top and then loose the grip slowly.
-
Page 6: Filter Cleaning
5. FILTER CLEANING The filter must be cleaned from time to time. This must be done before changing the bag collection system and should also be done when work is completed or when there is poor suction. Procedure: 1. Push down the damper , cover the inlet. 2. -
Page 7: Warranty
WARNING Remember to switch off the machine and pull the plug out of the outlet before servicing. Pre-filter Loosen the 3 clamps and remove the top. Take the bag from the new filter. Lift out the filter and place it gently in a plastic bag. This bag must be properly disposed. Insert a new filter. -
Page 8: Problem Solving
Wrongly assembled or Adjust/Replace filters Dust blown from motor damaged filter system Abnormal noise Order service Notice ！！！ ____________________________________ Any other problem please contact Dynamic Diamond Tooling ______________________________________________________ Dynamic Diamond Tooling Tel: 407-298-7050 www.dynamicdiamondtooling.com 1924 Silver Star Road, Orlando, Florida 32804... -
Page 9: Technical Data
10. TECHNICAL DATA Data Unit TS2000/120V TS2000/230V Voltage 120V 230V Power（max） Current(UL) Airflow m³/h (max) Vacuum(Max) mbar Water lift(inch) inch Main hose Metric 7.5mx D50 7.5mx D50 (mm) USCS 24’X2’’ 24’X2’’ (inch) Inlet Metric (mm) USCS 2.8’’ 2.8’’ (inch) Pre filter 99.5 99.5 EN 779-F8... - Page 10 DDV26 - 120V Packing list Description Quantity Unit DDV26 dust extractor S8046 D50 S wands,2PCS/SET C2031 D70/50 reducer S8008 D50 EVA anti static hose Meter S8006 D50 hose cuff S8045 D50 floor brush...
- Page 11 Quantity Dimension Note DDV26 engine kit C2142 DDV26 wagon complete packing C2095 DDV26 slider bar upper bracket C2141 DD V26 right stand column C2146 DDV lifting hook C2098 DDV26 slider bar C2087 DDV barrel holder C2045 D25 round tube pulley...
- Page 12 DDV26 - 120V Dustbin kit...
- Page 13 Flap assembly kit C2091 Balancing weight C2084 Continuous bag holder packing S0089 M8*15 S0090 Belt packing S8035 Continuous folding bag S8006 D50 anti static hose cuff S8007 D50 EVA hose D50*520mm S8029 DDV26 main filter S0092 Hose Clamp 40-63 S8036 Rubber ring...
- Page 14 DDV26 - 120V Engine kit Description Dimension Note C2126 DDV26 engine cover Engine kit S0006 Connector PG11 S2005 Cable with electricity plug 3*1.5/8 meters 240V length,-RVV-10A plug S2006 Cable with electricity plug 3*2.0/8 meters length, 110V -RVV-US plug C1106 Baffle...
- Page 15 DDV26 motor package DDV26 motor package DDV26 motor package Description Quantity Dimension Notes S0091 C2115 HEPA filter top cover Description Quantity Dimension Notes S8031 H13 HEPA filter S0091 Description Quantity Dimension Notes C2116 HEPA filter cover C2115 HEPA filter top cover...
- Page 16 DDV26 - 120V D70 inlet kit Description Quantity Dimension Note C3031 70mm inlet gasket C3032 70mm inlet S0075 Cross screw with flat head M5*10 C3019 Slideway C2043 Inlet close door S0076 Copper collision C2022 Index plunger C3021 70 outer inlet...
Need help?
Do you have a question about the DDV26 and is the answer not in the manual?
Questions and answers