Advertisement
Quick Links
Advertisement
Related Manuals for SAFE CAMS Y3S
Summary of Contents for SAFE CAMS Y3S
- Page 1 SAFE CAMS Y3S USER MANUAL www.safecams.in...
- Page 2 Thank you, for purchasing a SAFE CAMS dash camera. Disclaimer 1.Please read the set up and usage instructions carefully before operation. 2.You should not install this dash camera at a place that would obstruct or reduce the driver’s view. Make sure your usage of the device complies with pertinent vehicle codes/laws in your state in India.
- Page 3 temperatures (either high or low temperature) which tends to degrade or damage the unit and its normal functionality. 7.You should examine, check and verify the dash camera, including the memory card, at least every 3 months to ensure that the video reception and recording are working properly.
- Page 4 3.Do not try to open the shell of the device or try and repair the device or its accessories by yourself. Please contact SAFE CAMS so that a professional person can repair the device. 4.Do not use any chemical substance or cleaner solvent to clean the device.
- Page 5 6.Please protect the environment, don’t discard this machine randomly or throw it into a fire. Recycle it if your state has an electronics waste management system. 7.Please ensure that the lens is kept clean with a moist soft cloth to ensure you get the best video footage from your dash camera.
- Page 6 Product Installation Guide 1.Turn off the vehicle engine. 2.Insert the SD card into the card slot. ATTENTION Please use a high-speed SD card (Class 10 or above), capacity is not less that 8GB. Max Capacity will be based on the model you have purchased, please check the specifications section of the manual.
- Page 7 5.Ensure that the power cable is neatly tucked into the roof of the car, along the rubber tubing along the side of the door and under the lower part of the dashboard to the fuse box. This will ensure that there are no loose wires in the vehicle from the dash camera to the power supply.
- Page 8 7.Adjust the lens position to ensure that the camera covers the entire view from the rear and front of the vehicle. Also ensure that the camera is not recording too much of the vehicle’s bonnet. 8.Once all the wires are connected, switch the vehicle on, the dash camera will start automatically, with a red/blue light blinking on the device.
- Page 9 Lower than Class 10 will cause problems like video stutter, black screen or your video footage not being recorded at all. 7.Please use the mobile application recommend by SAFE CAMS to connect to our dash camera via WIFI.
- Page 10 Product Specifications • Chipset: Novatek • Sensor: Sony Low Light sensor on both front and rear cameras • Lens: 170 wide angle lens on both front and rear cameras • Video Resolution: Full HD 1080p @ 30fps • Photo Resolution: 12MP •...
- Page 11 WIFI APP 1.Please download the application for Android or Apple using the QR codes below: ANDROID 2.Turn on your dash camera, you will see blue and red light flashing on the power side of the device. 3.Open the mobile application. 4.You will be redirected to WIFI section of your phone.
- Page 12 info@safecams.in www.safecams.in +91 84477 46202...