Page 2
ENFORCER DESCRIPTION The Grease Enforcer was designed for those facilities that want to take charge of their pretreatment system to meet wastewater discharge limits, solid waste disposal requirements and reduce their risk of exposure to es- calating disposal costs. You can think of it as having a pumping truck permanently stationed on site providing daily disposal service, but with an environmentally “friendly”...
7. The fats, oils and grease separate from the effluent in the FOG Enforcer The “cleaned” efflu-ent passes through the FOG Enforcer and is returned to the separator tank. 8. The motors & heaters in the FOG Enforcer activate, skimming the fats, oils & grease out and depositing them into a grease collection container.
Page 5
The Grease Enforcer is designed to operate with 230 volt three phase power. The system requires 30 amp rated fuses on the supply input. The system has individual internal fusing for each major component group.
Tabs punched in indicate “ON” setting The FOG Enforcer Grease/Solids Timer System offers a great deal of flexibility to match the needs of your kitchen. This improved version incorporates dual 24-Hour Timers coupled with dual selector switches (one each for solids removal cycle and grease removal cycle). The selector switch provides three settings (heavy, medium and light) in order to best handle the grease and solids loading from your kitchen operation.
Inspect the grease outlet sump for build-up of congealed fats or fine solids. Wipe off any accumulation. QUARTERLY Grease the drive cam on each of the Grease Enforcer’s diaphragm lift pumps. There is a grease fitting on the drive cam’s housing. (Please see Page 26 “Grease Enforcer Diaphragm Pump Identification”) Check hose connections (quick disconnect) for tight fit.