Download
Share
Print this page
  1. Manuals
  2. Brands
  3. LOOP 3D Manuals
  4. 3D Printers
  5. LOOP PRO X
  6. Quick installation manual

LOOP 3D LOOP PRO X Quick Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Quick Installation Guide
1

Advertisement

loading

Summary of Contents for LOOP 3D LOOP PRO X

  • Page 1 Quick Installation Guide...
  • Page 2 CONTENTS Setting-up ................3 Inside the Box ................14 Registering & Activating ............17 Getting Started ..............25 Follow the QR code for installation video...

  • Page 3: Setting-Up

    Setting-up...
  • Page 4 Lift down the crates with a forklift or a pallet jack into the desired place. Make sure that you placed the crates on the same floor which you are going to make the installation of the 3d printer.
  • Page 5 Unlock the cabinet crate’s fasteners and remove all lids. Unscrew the screws located at the bottom connection points of the crate and then remove the top and side lids together as one piece.
  • Page 6 Carry the rest of the crate away with caution. Place the cabinet on a rigid and stable ground.
  • Page 7 Unlock the fasteners located on right, left and front bottom of the crate. Unscrew the screws located at the bottom connection points of the crate and then remove the top and side lids together as one piece. Place the cabinet and the machine next to each other to make the carrying process easier.
  • Page 8 At least 3 people will be necessary to place the machine on top of the cabinet. As two persons will lift from the side handles, one person will need to support from the back of the machine to help balancing. Please wear protective equipment as the machine itself is heavy.
  • Page 9 Unscrew the six screws behind the cabinet which hold the back lid, then remove and place the lid in a safe location.
  • Page 10 Remove the clip from bottom adapter inlet and insert the tube coming out from the drybox to the adapter's bottom inlet. Push the tube as much as it goes in, then place the locking clip to the adapter. After locking, push the tube a little more one last time to ensure that it is mounted successfully.
  • Page 11 Open the front and top lids of the machine and remove the safety fillings, remove the tools that hold the axes from moving, then cut the cable ties with a side cutter. Plug the power cord to the power inlet behind the machine and then plug the other end to a voltage regulated UPS or at least to a surge protected socket.
  • Page 12 Connect an active ethernet line cable to the ethernet port behind the machine. Turn on the machine using the power switch that is placed at the back of the machine.
  • Page 13 After the installation is fully complete, if you want to use the machine wireless instead of ethernet, you can go to settings from the main screen and connect to your wifi from the network tab.

  • Page 14: Inside The Box

    Inside the Box...
  • Page 15 1x Spool 1x Spool Dynamide CF Filament (2 Kg) Dynamide GF Filament (2 Kg)
  • Page 16 Box 1 Installation Guide Stick Glue Tweezer Allen Key Nozzle Needle Pliers Safety Gloves Safety Glasses Cutter Box 2 Wheel Plug...

  • Page 17: Registering & Activating

    Registering & Activating...
  • Page 18 When the machine is turned on, if you don't have an active ethernet connection, the screen will prompt that it can't connect to a network so you will have to press Wi-Fi setup to proceed. Find your Wi-Fi on the list and select it, enter your password if the connection is password protected.
  • Page 19 In the next step, screen will greet you with a QR-code and a Registration ID. Please note that registration ID down for further use. Go to my.loop3dprinter.com and sign-up for your LOOP 3D CLOUD account.
  • Page 20 There will be an activation e-mail sent to your e-mail address after signing- up. If you did not receive the activation e-mail click 'resend e-mail' option. Please click the activation link from your e-mail. The link will lead you to the sign-in screen.
  • Page 21 Tutorial will guide you on some basic operations of LOOP 3D CLOUD. Press next to proceed. When you arrive at the last page of the tutorial, press 'done' this will take you back to the main screen.
  • Page 22 Select PRINTERS from the top menu and Click the REGISTER A LOOP 3D PRINTER button. Enter your registration ID, then press ‘OK’.
  • Page 23 You will receive a message that informs, ‘the PRINTER WAS REGISTERED SUCCESSFULLY.’ Press 'OK'. Now, your LOOP 3D PRINTER is successfully registered and ready to print.
  • Page 24 The QR code and the registration ID on your machine screen will change to "READY TO PRINT" screen. Now you are ready to print your 3D models with LOOP PRO 3D PRINTER.

  • Page 25: Getting Started

    Getting Started...
  • Page 26 Plug in your LOOP 3D Printer and the Material Conditioning Unit, set the Material Conditioning Unit to the highest setting by turning the setting knob inside clockwise. Place the filament hanger rod to the second step from the front of the Material Conditioning Unit.
  • Page 27 Login to your my.loop3dprinter.com Filament Tracking: account and make sure your printer is defined Use lament tracking Filament left (g) under the Printers tab. Click the tools button RESET TO 0.5 KG right next to your printer and click the printer settings.
  • Page 28 After saving, the user interface will direct you to the projects tab where you need to click the slice button right next to the last version of the model you prepared to print. When you click ‘slice’, it will take you to the slicing interface where you need to select the proper slicing profile of the loaded material with the quality you desire.
  • Page 29 We suggest you to start with one of the sample models that are already pre-loaded on your account for example like the ripple test. So you can ensure everything is good to go before sending a more complex print. If you don't want to send the print online, you can also click one the name of the sliced gcode file and download it.
  • Page 32 www.loop3dprinter.com info@loop3dprinter.com loop3dprinter loop3d...