Summary of Contents for SAHLINS 7152 Series
- Page 3 During the design and manufacture of the equipment, we have taken great care to reduce health and safety risks. Laying cables or installing ropes involves a variety of risks, and to reduce these it is important: -to study and follow the instructions -to train staff in maintenance and safety on an ongoing basis -to ensure that appropriate equipment and tools are available -that the owner and supervisor are responsible for ensuring that effective safety...
- Page 4 1. Read and acquaint yourself with all of the warnings, precautionary measures and instructions in the user- and service manual, and read and learn the im- portance of all the signs on and around the equipment. In the case of any doubt, ensure that you have answers to all your questions before beginning work.
- Page 5 damaged parts before starting and operating the equipment. Only use original spare parts. 17. Before starting on operating equipment, ensure that no people, animals, tools, spare parts or other foreign objects are present in, on, under or around it. Check that all protective and safety equipment is correctly installed and in satisfactory condition.
- Page 6 It is important to use the right sized reel lift, as otherwise there may be a risk of acci- dents. Model 7152-1012 7152-1022 7152-1040 Max. reel weight 1200 kg 2200 kg 4000 kg Central hole Ø75 mm Ø105 mm Ø130 mm Weight 3.5 kg 8 kg...
- Page 7 The reel lift contains the following parts: Bracket Sleeve (fluted) Shaft Grease nipple...
- Page 8 Check the cable reel's weight. Check that: - the reel lift to be used is intended for the reel. - all other components to be used can cope with the reel weight. - none of the equipment is deformed or damaged in any way. - the ball bearings and all joints run freely.
- Page 9 As the reel lift has ball bearings, the reel will rotate slightly when cable is being pulled off. Make sure you respect safety distances and that the reel does not get out of control or start to sway dangerously. To reduce these phenomena, you can attach a reel brake (item no. 7152-1000) as an accessory.
- Page 10 The reel lift's component parts are permanently attached to each other. There are no loose spare parts. Damage and deformation Inspect Ball bearings Inspect Arm joints Inspect Ball bearings Lubrication X (1) (1)Lubrication is done via grease nipples...