Do you have a question about the HEAVY BAG BOXING TOWER and is the answer not in the manual?
Questions and answers
Summary of Contents for ALPHAFIT HEAVY BAG BOXING TOWER
Page 1
Obtaining instruction in appropriate techniques and methods of use is your own responsibility. You assume all risks and responsibilities for all damage injury or death which may occur during or following incorrect use of this equipment in any matter whatsoever. AlphaFit bears no liability beyond the replacement value of the equipment in question.
Page 2
Read this entire guide before attempting to build or use this machine. This guide contains step by step instructions for proper assembly. AlphaFit recommends a minimum of two (2) people to assemble the Heavy Bag Boxing Tower. Use the parts list included in this guide to verify that all parts are accounted for before assembly. If any parts are missing, contact...
Page 3
HEAVY BAG BOXING TOWER ASSEMBLY STEP 1: ANCHOR UPRIGHT TO THE FLOOR Position the Boxing Column in the desired spot. Bolt to floor through column base plate with appropriate anchors. PRO TIP: Fasteners for affixing uprights to the floor are not provided. Always choose fixings specially suited to the material in your floor which have sufficient holding power.
Page 4
HEAVY BAG BOXING TOWER ASSEMBLY STEP 3: SECURE THE BOXING BAG HANGING KIT Connect carabiner to spring, then connect swivel to opposite end of spring to form the Boxing Bag Hanging Kit. Attach the Boxing Bag Hanging Kit through the eyelet at the end of the Heavy Bag Mount.
Need help?
Do you have a question about the HEAVY BAG BOXING TOWER and is the answer not in the manual?
Questions and answers