Intended use The following instructions are essential for proper installation, assembly, mounting and operation. Please keep these instructions for future reference. The construction of the product complies with European statutory technical requirements. Adherence to all applicable standards has been proven during the conformity process. In order to maintain the product in this condition, it is essential that you as the user follow the advice given in these instructions.
Safety directions Make sure the voltage is the same as that indicated on the rating plate of the appliance. Do not operate this appliance if the cable or plug becomes damaged. If the cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualified person ...
Installation Please note: A gap of at least 60mm from the floor and 100mm to any window frame above must be maintained. Minimum distance to any corner must also be 100mm. To the ceiling, the distance should keep 650mm at least. Always check that the radiator is horizontal. The radiator must Not be installed below a permanent wall socket.
SETTING THE TIME AND DAY Press “ON/OFF”, then “SET” to set temperature by press “+” or “-” when display is flashing. Press “SET” 3 times ,“MO“ flashing, set the day by pressing “+”or “-” Press “SET” 4 times, Hour flashing, set the hour by pressing “+”or “-” Press “SET”...
Press “ MODE” 3 times to set the hour by pressing “+” or “-” Press“ MODE” 4 times to set minute by pressing “+”or “-” Set all days up to Sunday, then set temperature for each day Press “MODE” 1 time and set the comfort temperature for Monday by pressing “+”or “-” Press “...
Dispose of the product for disposal at a specialized waste disposal site. You thereby fulfill the legal obligations and make your contribution to environmental protection. Made in P.R.C Imported by BYKO Skemmuvegi 2a, 200 Kópavogur, Iceland...
Need help?
Do you have a question about the NW-LED40 and is the answer not in the manual?
Questions and answers