Page 1
Premere il pulsante WPS di NIDO per 1-3 secondi fino a quando non compare il led giallo. Premere il pulsante della NIDO SMART PLUG per 5 Aprile l’applicazione NIDO e configurare la NIDO secondi, attendere che la luce della NIDO SMART PLUG SMART PLUG.
Page 2
Connect the NIDO SMART PLUG to the electrical socket. Press the NIDO WPS button for 1-3 seconds until the yellow LED appears. Press the NIDO SMART PLUG button for 5 seconds, wait Open the NIDO application and configure the NIDO for the NIDO SMART PLUG to start blinking..